Debian Hamradio Digital Voice packages

Debian Hamradio Digital Voice Packages ✏

This metapackage will install packages useful when using digital voice modes on RF and for Internet linking.

	Package	Version	Description
Official Debian packages with high relevance
▾	dsdcc	1.9.3-2.1 ↺ New upstream version 1.9.5 available	Digital Speech Decoder (DSD)
dsdcc: Digital Speech Decoder (DSD) Description DSDcc is a digital speech decoder. Supported formats: DMR/MOTOTRBO: ETSI two slot TDMA standard. MOTOTRBO is a popular implementation of this standard. D-Star: developed and promoted by Icom for Amateur Radio customers. dPMR: ETSI narrowband FDMA standard. This is somehow similar to NXDN 2400 Baud rate mode. Yaesu System Fusion (abbreviated YSF): developed and promoted by Yaesu for Amateur Radio customers partly inspired by gr-ysf. Voice full rate with SerialDV is not supported. This package contains dsdccx, the command line interface. Maintainer Debian Hamradio Maintainers Michael Hudson-Doyle Versions 1.9.0-1 (bullseye) 1.9.3-2 (bookworm) 1.9.3-2 (trixie) 1.9.3-2.1 (sid) 1.9.5 (upstream) Popularity 2 regular users 3 recent 45 total installations (of 236029 submissions) Debian Maintainer page Bugs Git Upstream Home page Bugs Git Improve entry Upload Screenshot Create tags Translate description Close
▾	freedv	0.96.6.1592-1 ↺ New upstream version 1.9.9.1 available	Digital Voice mode for ham radio
freedv: Digital Voice mode for ham radio FreeDV is a digital voice mode intended for transmission and reception over high-frequency (HF) radio. It uses a frequency division multiplex (FDM) modem with 15 carriers and no forward error correction (FEC). A low bit-rate voice coder-decoder (Codec 2) provides voice quality without the listener fatigue caused by noise and interference normally associated with analog single sideband (SSB) voice. A HF SSB transceiver, personal computer and two sound cards are required. Path simulation and on-the-air HF testing have shown that decoding voice is possible at a signal-to-noise ratio of 4 dB. The FreeDV software was developed by David Rowe (Codec 2, FDM modem implementation, integration) and David Witten (GUI, architecture design). The FreeDV design and user interface was based on the earlier FDMDV program which was developed by Francesco Lanza. The FDM modem design and development was supported from Peter Martinez. Maintainer Debian Hamradio Maintainers A. Maitland Bottoms Versions 1.3.1-3 (buster) 1.1-1 (stretch) 1.8.11-1 (sid) 1.8.11-1 (trixie) 1.4.3~1gdc71a1c-1 (bullseye) 1.8.7-1 (bookworm) 0.96.6.1592-1 (jessie) 1.9.9.1 (upstream) Tags ✏ uitoolkit gtk, wxwidgets Popularity 3 regular users 9 recent 90 total installations (of 236029 submissions) Debian Maintainer page Bugs Git Upstream Home page Bugs Git Improve entry Translate description Close
▾	qtel	19.09.1-3 ↺ New upstream version 24.02 available	Graphical client for the EchoLink® protocol
qtel: Graphical client for the EchoLink® protocol Qtel is a graphical client program for the EchoLink® ham radio protocol. EchoLink® allows licensed amateur radio operators to communicate over the Internet, including remote access to station equipment. EchoLink® is a registered trademark of Synergenics, LLC. Maintainer Debian Hamradio Maintainers Benjamin Drung Versions 19.09.2-1 (bookworm) 19.09.2-1.1 (sid) 15.11-2 (stretch) 17.12.2-4 (buster) 19.09.1-3 (bullseye) 24.02 (upstream) Popularity 5 regular users 6 recent 89 total installations (of 236029 submissions) Debian Maintainer page Bugs Git Upstream Home page Bugs Improve entry Create tags Translate description Close
▾	svxlink-calibration-tools	19.09.1-3 ↺ New upstream version 24.02 available	Calibration tools for SvxLink amateur radio suite
svxlink-calibration-tools: Calibration tools for SvxLink amateur radio suite Description SvxLink facilitates remote control of amateur radio transceivers via the EchoLink® protocol. This package included the calibration tools. EchoLink® allows licensed amateur radio operators to communicate over the Internet, including remote access to station equipment. The RemoteTrx server provides remote control of a connected radio transceiver. EchoLink® is a registered trademark of Synergenics, LLC. Maintainer Debian Hamradio Maintainers Benjamin Drung Versions 17.12.2-4 (buster) 19.09.2-1.1 (sid) 19.09.2-1 (bookworm) 19.09.1-3 (bullseye) 24.02 (upstream) Popularity 2 regular users 1 recent 38 total installations (of 236029 submissions) Debian Maintainer page Bugs Git Upstream Home page Bugs Improve entry Upload Screenshot Create tags Translate description Close
▾	svxlink-gpio	19.09.1-3 ↺ New upstream version 24.02 available	GPIO control scripts SvxLink amateur radio server
svxlink-gpio: GPIO control scripts SvxLink amateur radio server Description This package contains the GPIO control scripts for general purpose I/O for the SvxLink suite. SvxLink provides access to a ham radio transceiver via the EchoLink® protocol. EchoLink® allows licensed amateur radio operators to communicate over the Internet, including remote access to station equipment. By connecting into a server connected to a repeater, an operator can call into a local radio net via the Internet while traveling out of the area. EchoLink® is a registered trademark of Synergenics, LLC. Maintainer Debian Hamradio Maintainers Benjamin Drung Versions 19.09.2-1.1 (sid) 17.12.2-4 (buster) 19.09.2-1 (bookworm) 19.09.1-3 (bullseye) 24.02 (upstream) Popularity 31 regular users 38 total installations (of 236029 submissions) Debian Maintainer page Bugs Git Upstream Home page Bugs Improve entry Upload Screenshot Create tags Translate description Close
▾	svxlink-server	19.09.2-1 ↺ New upstream version 24.02 available	Voice-over-IP server for ham radio operators
svxlink-server: Voice-over-IP server for ham radio operators The SvxLink server provides access to a ham radio transceiver via the EchoLink® protocol. It can act as a repeater controller or operate on a simplex channel. Based on a modular design, the server can be configured to provide voice mail and echo (talkback) service. It is normally used together with the 'remotetrx' package, which allows the remote control of a radio transceiver. For a client program implementing the EchoLink® protocol, please have a look at the 'qtel' package. EchoLink® allows licensed amateur radio operators to communicate over the Internet, including remote access to station equipment. EchoLink® is a registered trademark of Synergenics, LLC. Maintainer Debian Hamradio Maintainers Benjamin Drung Versions 19.09.2-1.1 (sid) 15.11-2 (stretch) 17.12.2-4 (buster) 19.09.1-3 (bullseye) 19.09.2-1 (bookworm) 24.02 (upstream) Popularity 22 regular users 34 total installations (of 236029 submissions) Debian Maintainer page Bugs Git Upstream Home page Bugs Improve entry Create tags Translate description Close
▾	svxreflector	17.12.2-4 ↺ New upstream version 24.02 available	Conference server for SvxLink amateur radio servers
svxreflector: Conference server for SvxLink amateur radio servers Description The SvxReflector can interconnect multiple SvxLink nodes. Audio sent to the reflector is broadcast to all other nodes. Only one talker is allowed at a time. For a client program implementing the EchoLink® protocol, please have a look at the 'qtel' package. EchoLink® allows licensed amateur radio operators to communicate over the Internet, including remote access to station equipment. EchoLink® is a registered trademark of Synergenics, LLC. Maintainer Debian Hamradio Maintainers Benjamin Drung Versions 19.09.2-1.1 (sid) 19.09.2-1 (bookworm) 19.09.1-3 (bullseye) 17.12.2-4 (buster) 24.02 (upstream) Popularity 23 regular users 28 total installations (of 236029 submissions) Debian Maintainer page Bugs Git Upstream Home page Bugs Improve entry Upload Screenshot Create tags Translate description Close