This metapackage will install packages useful when using AX.25, including IPv4
over AX.25 and APRS, with Debian.
Official Debian packages with high relevance
|
▾
|
aprsdigi
|
3.5.1-1
↺
New upstream version
3.11.0
available
|
повторитель для APRS
|
aprsdigi:
повторитель для APRS
- Description
-
✏
Aprsdigi — повторитель для системы автоматического определения
местонахождения (Automatic Position Reporting System — APRS). Он использует
сетевой стек AX.25 ядра Linux, а также возможность SOCK_PACKET слушать
пакеты на одном или нескольких радио-интерфейсах (портах) и повторять эти
пакеты, с возможностью некоторых изменений, на том же или других
интерфейсах. Aprsdigi может также использовать туннелирование с помощью
IPv4 или IPv6 UDP с использованием юникастовых или мультикастовых адресов
для связи с другими APRS повторителями.
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio
- interface
- daemon
- network
- server
- role
- program
- use
- proxying, routing
- Popularity
-
- 2 regular users
-
4 recent
-
50 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
aprx
|
2.9.0+dfsg-1
|
APRS Digipeater and iGate
|
aprx:
APRS Digipeater and iGate
- Description
-
Aprx is an APRS specific Digipeater and iGate.
It supports multiple KISS-TNCs on serial ports and listening
to any kernel AX.25 network interfaces.
Additional features include a built-in "erlang-monitor" to analyze
activity level of radio channels.
This software requires a valid (and unique) ham radio callsign to
operate fully and is therefore useful mainly for licensed radio
amateurs.
- Maintainer
-
- Versions
-
- Popularity
-
- 20 regular users
-
3 recent
-
59 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
ax25-apps
|
0.0.8-rc5+git20230513+afc4a5f-1
|
приложения для любительского радио AX.25
|
ax25-apps:
приложения для любительского радио AX.25
- Description
-
✏
Этот пакет предоставляет специальные пользовательские приложения
для любительского радио, которые используют сетевые протоколы
AX.25 Net/ROM или ROSE:
- axcall: программа общего назначения для подключения к AX.25,
NET/ROM и ROSE
- axlisten: сетевой монитор всего трафика AX.25, принимаемого системой
- ax25ipd: RFC1226-совместимый сервис передачи трафика AX.25 через IP
- ax25mond: ретранслирует данные, принятые из сокетов в сокет
монитора AX.25
- Maintainer
-
- Versions
-
-
0.0.8-rc5+git20190411+0ff1383-5
(bookworm)
-
0.0.8-rc5+git20190411+0ff1383-4
(bullseye)
-
0.0.8-rc4-2
(buster)
-
0.0.8-rc4-2
(stretch)
-
0.0.8-rc5+git20230513+afc4a5f-1
(trixie)
-
0.0.8-rc2+cvs20130510-4
(jessie)
-
0.0.8-rc5+git20230513+afc4a5f-1
(sid)
- Tags
-
✏
- devel
- doc
- hardware
- hamradio
- interface
- commandline, text-mode, x11
- mail
- smtp
- role
- program
- scope
- utility
- uitoolkit
- ncurses
- Popularity
-
- 10 regular users
-
4 recent
-
104 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
ax25-tools
|
0.0.10-rc5+git20230513+d3e6d4f-1
|
tools for AX.25 interface configuration
|
ax25-tools:
tools for AX.25 interface configuration
- Description
-
These are hamradio specific tools for setting up and configuring hamradio
ports that use AX.25 Net/ROM or ROSE network protocols.
This package is created separately for those who do not want to install tools
that need X to run.
- Maintainer
-
- Versions
-
-
0.0.10-rc5+git20230513+d3e6d4f-1
(trixie)
-
0.0.10-rc2+cvs20120204-4
(jessie)
-
0.0.10-rc4-1+deb9u1
(stretch)
-
0.0.10-rc4-3
(buster)
-
0.0.10-rc5+git20190411+3595f87-5
(bullseye)
-
0.0.10-rc5+git20190411+3595f87-6
(bookworm)
-
0.0.10-rc5+git20230513+d3e6d4f-1
(sid)
- Tags
-
✏
- admin
- hardware
- hardware
- hamradio
- interface
- commandline
- role
- program
- scope
- utility
- use
- configuring
- Popularity
-
- 13 regular users
-
7 recent
-
112 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
ax25-xtools
|
0.0.10-rc4-3
|
инструменты для настройки интерфейса AX.25 (с графикой для X11)
|
ax25-xtools:
инструменты для настройки интерфейса AX.25 (с графикой для X11)
- Description
-
✏
Данные инструменты любительского радио служат для создания и настройки
портов любительского радио, использующего сетевые протоколы AX.25 Net/ROM
или ROSE.
Этот пакет создан отдельно для тех, кто хочет установить инструменты с
графическим интерфейсом.
- Maintainer
-
- Versions
-
-
0.0.10-rc4-1+deb9u1
(stretch)
-
0.0.10-rc2+cvs20120204-4
(jessie)
-
0.0.10-rc5+git20230513+d3e6d4f-1
(trixie)
-
0.0.10-rc5+git20190411+3595f87-6
(bookworm)
-
0.0.10-rc5+git20190411+3595f87-5
(bullseye)
-
0.0.10-rc5+git20230513+d3e6d4f-1
(sid)
-
0.0.10-rc4-3
(buster)
- Tags
-
✏
- admin
- hardware
- hardware
- hamradio
- interface
- x11
- role
- program
- scope
- utility
- use
- configuring
- x11
- application
- Popularity
-
- 3 regular users
-
7 recent
-
67 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
ax25mail-utils
|
0.14-1
|
hamradio packet utilities for fbb
|
ax25mail-utils:
hamradio packet utilities for fbb
- Description
-
This package provides utilities to download a message list or messages
from a fbb AX.25 bbs:
- axgetlist - read the message list from the BBS
- axgetmail - automatically download messages from the F6FBB BBS
- axgetmsg - download selected messages from F6FBB BBS
- home_bbs - find home BBS or force a home BBS for the callsign
- msgcleanup - delete the messages with their lifetime exceeded
- ulistd - collect FBB BBS messages list sent via unproto frames
- update_routes - update the database of BBS and callsigns
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio
- interface
- commandline
- role
- program
- scope
- utility
- use
- downloading
- Popularity
-
- 1 regular users
-
3 recent
-
58 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
axmail
|
2.12.2-1
|
Mail user agent for ax.25 users, accessed via a node frontend
|
axmail:
Mail user agent for ax.25 users, accessed via a node frontend
- Description
-
axMail provides a simple low-overhead user interface, similar to /bin/mail,
xNOS and other packet BBS systems. It's useful for providing good SMTP mail
services for AX.25 users over slow radio channels.
- Maintainer
-
- Versions
-
- Popularity
-
- 1 regular users
-
1 recent
-
37 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
direwolf
|
1.4+dfsg-1
|
Soundcard TNC for APRS
|
direwolf:
Soundcard TNC for APRS
- Description
-
Dire Wolf is a software "soundcard" modem/TNC and APRS encoder/decoder. It can
be used stand-alone to receive APRS messages, as a digipeater, APRStt gateway,
or Internet Gateway (IGate). It can also be used as a virtual TNC for other
applications such as APRSIS32, UI-View32, Xastir, APRS-TW, YAAC, UISS, Linux
AX25, SARTrack, and many others.
- Maintainer
-
- Versions
-
- Popularity
-
- 134 regular users
-
3 recent
-
189 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
fbb
|
7.011-3
|
Packet radio mailbox and utilities
|
fbb:
Packet radio mailbox and utilities
- Description
-
The fbb package contains software written by f6fbb for setting up a packet
radio mailbox. It is intended for amateur radio operators. A short overview
of some of the binaries:
- fbb: Script to start the daemon.
- xfbbd: The daemon which listens for incoming connects.
- epurmess: Delete messages based on age.
- epurwp: White Pages maintenance.
- reqdir: FBB server which requests directory listings.
- xfbbC: B/W Ncurses console for xfbbd.
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio
- interface
- daemon, text-mode
- network
- server
- role
- program
- scope
- utility
- uitoolkit
- ncurses
- Popularity
-
- 3 regular users
-
2 recent
-
52 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
linpac
|
0.28-3
|
terminal for packet radio with mail client
|
linpac:
terminal for packet radio with mail client
- Description
-
LinPac is an application for the AX.25 packet radio environment.
It comes with a mail client.
Linpac is an attempt to create a packet radio terminal for Linux that
allows wide configurability and easy addition of new functions and special
functions needed by the user.
- Maintainer
-
- Versions
-
- Popularity
-
-
2 recent
-
55 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
minimodem
|
0.24-1
|
general-purpose software audio FSK modem
|
minimodem:
general-purpose software audio FSK modem
- Description
-
Minimodem is a command-line program which decodes (or generates) audio
modem tones at any specified baud rate, using various framing protocols.
It acts a general-purpose software FSK modem, and includes support for
various standard FSK protocols such as Bell103, Bell202, RTTY, TTY/TDD,
NOAA SAME, and Caller-ID.
Minimodem can play and capture audio modem tones in real-time via the
system audio device, or in batched mode via audio files.
Minimodem can be used to transfer data between nearby computers using an
audio cable (or just via sound waves), or between remote computers using
radio, telephone, or another audio communications medium.
- Maintainer
-
- Versions
-
- Tags
-
✏
- interface
- commandline
- role
- program
- use
- transmission
- Popularity
-
- 7 regular users
-
13 recent
-
144 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
multimon
|
1.0-7.1
|
Linux Radio Transmission Decoder
|
multimon:
Linux Radio Transmission Decoder
-
-
The multimon software can decode a variety of digital transmission modes
commonly found on UHF radio. A standard PC soundcard is used to acquire
the signal from a transceiver. The decoding is done completely in software.
Currently, the following modes are supported:
AX.25
1200 Baud AFSK
2400 Baud AFSK (2 variants)
4800 Baud HAPN
9600 Baud FSK (G3RUH)
POCSAG
512 Baud
1200 Baud
2400 Baud
Miscellaneous
DTMF
ZVEI
An arbitrary set of the above modes may run concurrently on the same input
signal (provided the CPU power is sufficient), so you do not have to know
in advance which mode is used. Note however that some modes might require
modifications to the radio (especially the 9600 baud FSK and the POCSAG
modes) to work properly.
POCSAG (Post Office Code Standards Advisory Group) is a common paging
transmission format.
This package is made with the original multimon. You probably want to
be running multimon-ng.
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio
- role
- program
- Popularity
-
- 7 regular users
-
7 recent
-
104 total installations
(of 236008 submissions)
- Debian
-
- Improve entry
-
|
▾
|
multimon-ng
|
1.3.0+dfsg-1
|
digital radio transmission decoder
|
multimon-ng:
digital radio transmission decoder
- Description
-
The successor to multimon, with support for more modes and improved
compatibility with moderns systems. It decodes the following digital
transmission modes commonly found on VHF/UHF bands:
POCSAG512 POCSAG1200 POCSAG2400
FLEX
EAS
UFSK1200 CLIPFSK AFSK1200 AFSK2400 AFSK2400_2 AFSK2400_3
HAPN4800
FSK9600
DTMF
ZVEI1 ZVEI2 ZVEI3 DZVEI PZVEI
EEA EIA CCIR
MORSE CW
X10
Multiple decoders can run concurrently on the same signal, which is
provided via a file or a pipe. Common setups are: a radio connected
via a sound card (may require modifications to the radio); samples
provided via a GNU Radio sink or the UDP audio stream in gqrx (via
netcat and sox).
- Maintainer
-
- Versions
-
- Popularity
-
- 34 regular users
-
7 recent
-
240 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
p10cfgd
|
1.0-16
|
Remote configuration daemon for Gracilis Packeten
|
p10cfgd:
Remote configuration daemon for Gracilis Packeten
-
-
The 'p10cfgd' daemon provides support for the 'rmtcfg' command in the
Gracilis Packeten amateur radio network packet switch. With this daemon,
and appropriate entries in the non-volatile configuration memory of a
Packeten, it is possible to have the switch load commands and information
at boot time. Further, this daemon appends a command which sets the date
and time in the clock on the Packeten.
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio
- interface
- daemon
- network
- server
- role
- program
- use
- configuring
- Popularity
-
- 1 regular users
-
1 recent
-
34 total installations
(of 236008 submissions)
- Debian
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soundmodem
|
0.18-1
|
Sound Card Amateur Packet Radio Modems
|
soundmodem:
Sound Card Amateur Packet Radio Modems
-
-
This package contains the driver and diagnostic utility for the
userspace SoundModem suite by Thomas Sailer.
This package allows you to use any soundcard supported by the kernel as
an Amateur Packet Radio modem.
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio
- interface
- x11
- uitoolkit
- gtk
- x11
- application
- Popularity
-
- 32 regular users
-
69 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
uronode
|
2.6-1
|
Node front end for AX.25, NET/ROM, Rose and TCP
|
uronode:
Node front end for AX.25, NET/ROM, Rose and TCP
- Description
-
URONode is a packet radio node front end for amateur radio operators.
It provides a shell modelled after those of LinuxNode, AWZNode and
Flexnode. It is capable of initiating connections to remote stations
and exposing services installed on them to users.
- Maintainer
-
- Versions
-
- Popularity
-
- 1 regular users
-
2 recent
-
35 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
xastir
|
2.2.0-1
|
X Amateur Station Tracking and Information Reporting
|
xastir:
X Amateur Station Tracking and Information Reporting
-
-
Xastir is an APRS client for X. APRS is the Automatic Position Reporting
System, a system where objects report their position (usually obtained from
GPS) on the air; Xastir displays this information graphically.
- Maintainer
-
- Versions
-
- Tags
-
✏
- field
- geography
- hardware
- hamradio
- interface
- x11
- role
- program
- uitoolkit
- motif
- use
- viewing
- x11
- application
- Popularity
-
- 11 regular users
-
5 recent
-
110 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
Official Debian packages with lower relevance
|
▾
|
ampr-ripd
|
2.4-1
|
Routing daemon for AMPRnet gateway announcements
|
ampr-ripd:
Routing daemon for AMPRnet gateway announcements
- Description
-
AMPRnet RIPv4 Listener and route injector daemon, used for participating in
the amateur radio 44/8 AMPRnet gateways tunnel network. It updates IPIP tunnel
routes based on incoming RIP updates from a master server.
- Maintainer
-
- Versions
-
- Popularity
-
- 4 regular users
-
1 recent
-
8 total installations
(of 236008 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is only useful for AMPRnet gateways.
- Improve entry
-
|
▾
|
baycomepp
|
0.10-17
|
драйверы для радиомодема HB9JNX
|
baycomepp:
драйверы для радиомодема HB9JNX
- Description
-
✏
Драйверы для модема пакетной радиосвязи baycom epp, разработанного HB9JNX.
Он использовался для AX25 пакетной связи с помощью любительского радио.
Оригинальный автор этого пакета исчез, и поэтому нет домашней страницы
проекта и нет файла debian/watch.
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio, modem
- interface
- x11
- role
- program
- scope
- utility
- uitoolkit
- gtk
- use
- driver
- x11
- application
- Popularity
-
-
3 recent
-
8 total installations
(of 236008 submissions)
- Debian
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
baycomusb
|
0.10-12.2
|
драйверы для радио-модема HB9JNX
|
baycomusb:
драйверы для радио-модема HB9JNX
- Description
-
✏
Драйверы для модема пакетной радиосвязи baycom usb, разработанного HB9JNX.
Он использовался для AX25 пакетной связи с помощью любительского радио.
Оригинальный автор этого пакета исчез, и поэтому нет домашней страницы
проекта и нет файла debian/watch.
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio, modem, usb
- interface
- x11
- role
- program
- scope
- utility
- uitoolkit
- gtk
- use
- driver
- x11
- application
- Popularity
-
- 1 regular users
-
3 recent
-
15 total installations
(of 236008 submissions)
- Debian
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
z8530-utils2
|
3.0-1-11
|
утилиты для HDLC-адаптеров на базе Z8530 для сетей AX.25
|
z8530-utils2:
утилиты для HDLC-адаптеров на базе Z8530 для сетей AX.25
- Description
-
✏
Этот пакет содержит утилиты для загрузки, настройки и модификации
драйвера ядра SCC-плат на базе Z8530.
Должен работать, как минимум, со следующими картами и внешними модемами:
- BayCom USCC
- карта PA0HZP с и без ESCC и/или внешнего тактового делителя (до 19200
бод (обратная петля)) и совместимые
- модем TCM3105, модем 4k8, модем 9k6 DF9IC (обратная петля), модем
HAPN 4k8 (конечно, подключённый к SCC-плате!).
- Maintainer
-
- Versions
-
- Tags
-
✏
- hardware
- hamradio, modem
- interface
- commandline
- role
- program
- scope
- utility
- use
- configuring, driver
- Popularity
-
-
1 recent
-
4 total installations
(of 236008 submissions)
- Debian
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
|