Debian Hamradio Software Defined Radio packages

Airspy is an open source Software Defined Radio that can receive between 24 MHz and 1750 MHz. Airspy has a 10 MHz bandwidth. 12bit ADC @ 20 MSPS (80dB SFDR, 64dB SNR, 10.4 ENOB) It is a High Speed USB device powered by the USB bus.

This package contains a set of command line utilities:

• airspy_cpldjtag: program CLPD
• airspy_info: probe device and show configuration
• airspy_max2837: chip register read/write tool
• airspy_rffc5071: chip register read/write tool
• airspy_si5351c: chip register read/write tool
• airspy_spiflash: read and write flash data from file.
• airspy_transfer: file based transmit and receive sdr

• A. Maitland Bottoms

• 1.0.10-2 (bookworm)
• 1.0.9-4 (bullseye)
• 1.0.9-3 (buster)
• 1.0.9-1 (stretch)
• 0.2.22.b4c38a7-1 (jessie)
• 1.0.10-3 (sid)
• 1.0.10-3 (trixie)

• 14 regular users
• 10 recent
• 191 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Create tags
• Translate description

The Nuand bladeRF is an open-source software-defined radio (SDR) system, comprised of an RF transceiver, a field-programmable gate array (FPGA), a microcontroller driving a USB 3.0 interface, and a suite of host libraries and drivers to facilitate interaction with the device.

This package provides command-line tools for controlling the bladeRF.

• A. Maitland Bottoms

• 0.2019.07-7 (bullseye)
• 0.2024.05-1 (trixie)
• 0.2024.05-1 (sid)
• 0.2016.06-1 (stretch)
• 0.2017.12~rc1-2 (buster)
• 0.2014.09~rc2-5 (jessie)
• 0.2022.11-1 (bookworm)

• 109 regular users
• 216 recent
• 1620 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Create tags
• Translate description

The CuteSDR application's primary purpose is for spawning custom applications or for educational use. It is NOT a full featured program as it is purposely kept simple in order for developers to more easily spin off their own applications. A further goal was to use only the stock functionality of Qt ie no libraries or special drivers. This limits CuteSDR to using only a network connection. The main gui and framework is written by Moe Wheatly, AE4JY.

CuteSDR itself has only a network interface and will directly support the RFSPACE NetSDR and SDR-IP radios. The siqs_ftdi and SDRxxServer applications (packaged separately) provide network interfaces to RFSPACE USB devices.

• A. Maitland Bottoms

• 1.20-4 (bookworm)
• 1.20-4 (trixie)
• 1.20-4 (sid)
• 1.13.42-2 (jessie)
• 1.13.42-2 (stretch)
• 1.20-3 (buster)
• 1.20-4 (bullseye)

uitoolkit

qt

• 15 regular users
• 7 recent
• 177 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Vcs

• Home page

• Translate description

GNU Radio provides signal processing blocks to implement software radios. It can be used with readily-available low-cost external RF hardware to create software-defined radios, or without hardware in a simulation-like environment. It is widely used in hobbyist, academic and commercial environments to support both wireless communications research and real-world radio systems.

GNU Radio applications are primarily written using the Python programming language, while the supplied performance-critical signal processing path is implemented in C++ using processor floating-point extensions, where available. Thus, the developer is able to implement real-time, high-throughput radio systems in a simple-to-use, rapid-application-development environment.

While not primarily a simulation tool, GNU Radio does support development of signal processing algorithms using pre-recorded or generated data, avoiding the need for actual RF hardware.

This package contains the gnuradio-companion, a graphical tool for creating signal flow graphs and generating flow-graph source code. Also included are a variety of tools and utility programs.

• A. Maitland Bottoms

• 3.7.10.1-2 (stretch)
• 3.8.2.0-14 (bullseye)
• 3.10.11.0-2 (sid)
• 3.10.11.0-2 (trixie)
• 3.10.5.1-3 (bookworm)
• 3.7.5-5 (jessie)
• 3.7.13.4-4 (buster)

role

dummy

suite

gnu

• 177 regular users
• 69 recent
• 1251 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Translate description

Hardware supported includes OpenHPSDR Hermes / Metis and Red Pitaya using the OpenHpsdr protocol.

hermesNB sources decimated downconverted 48K-to-384K receiver complex stream(s), and sinks one 48k sample rate transmit complex stream.

hermesWB sources raw ADC samples as a vector of floats, with vlen=16384. Each individual vector contains time contiguous samples. However there are large time gaps between vectors. This is how HPSDR produces raw samples, it is due to Ethernet interface rate limitations between HPSDR and the host computer.

The modules are compatible with version 3.8 of gnuradio and versions of Hermes firmware 1.8 through at 3.2. (known as OpenHPSDR protocol 1). It is not compatible with the new OpenHPSDR protocol 2.

This package contains the header files and grc block definitions.

• Debian Hamradio Maintainers
• A. Maitland Bottoms

• 3.0-2 (sid)
• 3.0-2 (trixie)
• 3.0-2 (bookworm)
• 1.2-1 (buster)
• 1.2.1-2 (bullseye)
• 0.0.0.bb77f3c-2 (stretch)

• 9 regular users
• 7 recent
• 124 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Upload Screenshot
• Create tags
• Translate description

The Osmocom project is a family of projects regarding Open source mobile communications.

While primarily being developed for the OsmoSDR hardware, this block as well supports:

• FUNcube Dongle through gr-funcube
• FUNcube Dongle Pro+ through gr-funcube
• RTL2832U based DVB-T dongles through librtlsdr
• RTL-TCP spectrum server (see librtlsdr project)
• gnuradio .cfile input through libgnuradio-blocks
• RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option)
• Great Scott Gadgets HackRF through libhackrf
• Nuand LLC bladeRF through libbladeRF library
• Ettus USRP Devices through Ettus UHD library
• Fairwaves UmTRX through Fairwaves' fork of UHD
• AIRSPY Receiver
• AIRSPY HF+ Receiver
• SoapySDR support
• Red Pitaya SDR transceiver (http://bazaar.redpitaya.com)
• FreeSRP through libfreesrp

Example applications include osmocom_fft, osmocom_siggen, and osmocom_spectrum_sense.

By using the OsmoSDR block you can take advantage of a common software API in your application(s) independent of the underlying radio hardware. This package provides C++ header files, documentation, and Python3 wrappers to the library.

• A. Maitland Bottoms

• 0.1.4-14 (buster)
• 0.2.4-1 (bookworm)
• 0.2.2-1 (bullseye)
• 0.1.4-12 (stretch)
• 0.1.3-2 (jessie)
• 0.2.6-1 (trixie)
• 0.2.6-1 (sid)

devel

library

role

devel-lib

• 105 regular users
• 46 recent
• 1021 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Translate description

inspectrum is a tool for analysing captured signals, primarily from software-defined radio receivers.

inspectrum supports the following file types:

 *.sigmf-meta, *.sigmf-data - Signal Metadata Format (SigMF) recordings
 *.cf32, *.cfile - Complex 32-bit floating point (GNURadio, osmocom_fft)
 *.cf64 - Complex 64-bit floating point samples
 *.cs16 - Complex 16-bit signed integer (BladeRF)
 *.cs8 - Complex 8-bit signed integer (HackRF)
 *.cu8 - Complex 8-bit unsigned integer (RTL-SDR)
 *.f32 - Real 32-bit floating point samples
 *.f64 - Real 64-bit floating point samples (MATLAB)
 *.s16 - Real 16-bit signed integer samples
 *.s8 - Real 8-bit signed integer samples
 *.u8 - Real 8-bit unsigned integer samples

Features:

• Large (100GB+) file support
• Spectrogram with zoom/pan
• Plots of amplitude, frequency, phase and IQ samples
• Cursors for measuring period, symbol rate and extracting symbols
• Export of selected time period, filtered samples and demodulated data

• Debian Hamradio Maintainers
• Christoph Berg

• 0.2.3-3 (bookworm)
• 0.2-1 (buster)
• 0.1.6.6287ae4-1 (stretch)
• 0.3.1-1 (trixie)
• 0.3.1-1 (sid)
• 0.2.3-1 (bullseye)

• 9 regular users
• 13 recent
• 216 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Upload Screenshot
• Create tags
• Translate description

These utilities can be used to set up low level functions in the "Noctar" (formerly "Phi") IQ demodulator board from Per Vices.

If you are unsure whether you need this package, then you don't.

• Simon Richter
• Andreas Beckmann

• 0.0.20130228-6 (buster)
• 0.0.20130228-3 (jessie)
• 0.0.20130228-5 (stretch)
• 0.0.20130228-6.1 (bullseye)
• 0.0.20130228-6.3 (bookworm)
• 0.0.20130228-6.3 (trixie)
• 0.0.20130228-6.3 (sid)

• 5 regular users
• 5 recent
• 75 total installations (of 243344 submissions)

• Maintainer page
• Bugs

• Home page

• Upload Screenshot
• Create tags
• Translate description

Software for the Mirics MSi2500 + MSi001 SDR platform

The hardware part of MiriSDR brings information from an antenna connector to a USB plug.

This package is the software that provides control of the USB hardware and an API to pass data to software defined radio applications on the host.

This package contains a set of command line utilities:

• A. Maitland Bottoms

• 0.0.4.59ba37-2 (jessie)
• 0.0.4.59ba37-5 (stretch)
• 0.0.4.59ba37-5 (bullseye)
• 0.0.4.59ba37-5 (bookworm)
• 2.0.0-4 (sid)
• 2.0.0-4 (trixie)
• 0.0.4.59ba37-5 (buster)

• 5 regular users
• 4 recent
• 98 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Upload Screenshot
• Create tags
• Translate description

Controller application for the Funcube Dongle software defined radio receiver, built using the HID API library and the Qt GUI toolkit.

The Funcube Dongle is a small software defined radio receiver for 64 MHz - 1.7 GHz. It fits into a computer's USB port and uses USB audio to transfer complex I/Q data to SDR applications. The control API for setting frequency, gain, filter, etc. uses the USB HID standard.

It provides full support for the Funcube Dongle API::

• Change frequency and apply frequency correction.
• Change RF gains and filters.
• Change IF gains and filters.
• LNA enhancement, bias current, etc.
• I/Q correction.
• Auto-repeat tuning buttons (click and hold button to scan).
• Variable frequency step.
• Upgrade and verify the firmware.

• Debian Hamradio Maintainers
• A. Maitland Bottoms

• 4.1-6 (trixie)
• 4.1-3 (buster)
• 4.1-5 (bullseye)
• 4.1-6 (bookworm)
• 4.1-3 (jessie)
• 4.1-6 (sid)
• 4.1-3 (stretch)

• 98 regular users
• 2 recent
• 135 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Create tags
• Translate description

rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip.

This package contains a set of command line utilities:

• rtl_adsb: a simple ADS-B decoder for RTL2832 based DVB-T receivers
• rtl_eeprom: an EEPROM programming tool for RTL2832 based DVB-T receivers
• rtl_fm: a narrow band FM demodulator for RTL2832 based DVB-T receivers
• rtl_sdr: an I/Q recorder for RTL2832 based DVB-T receivers
• rtl_tcp: an I/Q spectrum server for RTL2832 based DVB-T receivers
• rtl_test: a benchmark tool for RTL2832 based DVB-T receivers

• Debian Hamradio Maintainers
• A. Maitland Bottoms

• 0.6.0-4 (bookworm)
• 0.5.3-11 (stretch)
• 0.5.3-3 (jessie)
• 2.0.2-2 (trixie)
• 2.0.2-2 (sid)
• 0.6-1 (buster)
• 0.6.0-3 (bullseye)

• 124 regular users
• 46 recent
• 1361 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Upload Screenshot
• Create tags
• Translate description

The Soapy Airspy project provides a SoapySDR hardware support module. Using this, any program using SoapySDR to interface to software defined radio hardware can make use of Airspy receivers.

This is an empty dependency package that pulls in the Airspy module for the default version of libsoapysdr.

• Debian Hamradio Maintainers
• Andreas Bombe

• 0.2.0-4 (sid)
• 0.2.0-4 (trixie)
• 0.1.1-1 (buster)
• 0.2.0-3 (bookworm)
• 0.1.2-2 (bullseye)
• 0.1.0-1 (stretch)

• 46 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Upload Screenshot
• Create tags
• Translate description

The Soapy bladeRF project provides a SoapySDR hardware support module. Using this, any program using SoapySDR to interface to software defined radio hardware can make use of the nuand bladeRF device to transmit and receive.

This is an empty dependency package that pulls in the bladeRF module for the default version of libsoapysdr.

• Debian Hamradio Maintainers
• Andreas Bombe

• 0.4.1-2 (bullseye)
• 0.3.2-2 (stretch)
• 0.4.1-5 (sid)
• 0.4.1-5 (trixie)
• 0.3.5-1 (buster)
• 0.4.1-4 (bookworm)

• 35 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Create tags
• Translate description

Lime Suite is a collection of software supporting Lime Microsystems LMS7 RF transceiver based hardware such as the LimeSDR, LMS7002M UNITE board, or the Novena with LMS7 RF board.

This is an empty dependency package that pulls in the LMS7 support module for the default version of libsoapysdr.

• Debian Hamradio Maintainers
• Petter Reinholdtsen

• 16.12.0+dfsg-1 (stretch)
• 18.06.0+dfsg-1 (buster)
• 22.09.1+dfsg-1 (bookworm)
• 23.11.0+dfsg-3 (sid)
• 23.11.0+dfsg-3 (trixie)
• 20.10.0+dfsg-2 (bullseye)

• 48 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Create tags
• Translate description

The SoapyOsmo project provides SoapySDR hardware support modules using drivers in gr-osmosdr. Using this, any program using SoapySDR to interface to software defined radio hardware can make use of OsmoSDR, Mirics SDR, and RFSpace SDR devices.

This is an empty dependency package that pulls in the OsmoSDR module for the default version of libsoapysdr.

• Debian Hamradio Maintainers
• Andreas Bombe

• 0.2.5-1 (buster)
• 0.2.5-8 (sid)
• 0.2.5-8 (trixie)
• 0.2.5-4 (bullseye)
• 0.2.5-8 (bookworm)

• 41 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Upload Screenshot
• Create tags
• Translate description

The SoapyRemote project provides a client module and a server that make it possible on the client side to list and access hardware supported by SoapySDR modules on the server as if they were local modules.

This is an empty dependency package that pulls in the client module for the default version of libsoapysdr.

• Debian Hamradio Maintainers
• Andreas Bombe

• 0.3.2-1 (stretch)
• 0.4.3-1 (buster)
• 0.5.2-3 (bookworm)
• 0.5.2-1 (bullseye)
• 0.5.2-4 (sid)
• 0.5.2-4 (trixie)

• 39 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Create tags
• Translate description

The Soapy RTL-SDR project provides a SoapySDR hardware support module. Using this, any program using SoapySDR to interface to software defined radio hardware can make use of low cost DVB-T/DAB+ USB dongles based on the Realtek RTL2832U chip as receivers.

This is an empty dependency package that pulls in the RTL-SDR module for the default version of libsoapysdr.

• Debian Hamradio Maintainers
• Andreas Bombe

• 0.2.5-1 (buster)
• 0.2.2-2 (stretch)
• 0.3.0-2 (bullseye)
• 0.3.3-1 (bookworm)
• 0.3.3-1 (trixie)
• 0.3.3-1 (sid)

• 146 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Create tags
• Translate description

SoapySDR is a library providing a common interface to SDR (software defined radio) hardware. Support for different hardware is added through external modules.

This package contains the SoapySDRUtil command line utility which can list available modules and hardware.

• Debian Hamradio Maintainers
• tony mancill

• 0.8.1-5 (sid)
• 0.6.1-4 (buster)
• 0.7.2-2 (bullseye)
• 0.8.1-3 (bookworm)
• 0.8.1-5 (trixie)
• 0.5.4-1 (stretch)

• 72 regular users
• 58 recent
• 1003 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page
• Bugs
• Git

• Upload Screenshot
• Create tags
• Translate description

Both SoapySDR and the Universal Hardware Driver by Ettus Research projects provide libraries to access various software defined radio hardware through a common interface.

This UHD module makes all SoapySDR devices available to applications using libuhd. An interface in the other direction is available in the soapysdr-module-uhd package.

• Debian Hamradio Maintainers
• Andreas Bombe

• 0.4.1-1 (bullseye)
• 0.4.1-3 (bookworm)
• 0.4.1-4 (sid)
• 0.3.4-1 (buster)
• 0.4.1-4 (trixie)
• 0.3.2-1 (stretch)

• 3 regular users
• 111 total installations (of 243344 submissions)

• Maintainer page
• Bugs
• Git

• Home page

• Upload Screenshot
• Create tags
• Translate description

SDR++ is a cross-platform and open source SDR software with the aim of being bloat free and simple to use. It has wide hardware support, SIMD accelerated DSP and full waterfall update when possible.

• Debian Hamradio Maintainers
• Kyle Robbertze

• 1.0.3-1 (VCS)

• Git

• Home page