This metapackage will install packages useful when using
Software-Defined Radio with Debian.
Official Debian packages with high relevance
|
▾
|
airspy
|
1.0.9-3
|
drobný a výkonný prijímač softvérovo definovaného rádia - nástroje
|
airspy:
drobný a výkonný prijímač softvérovo definovaného rádia - nástroje
- Description
-
✏
Airspy je open source SDR (softvérovo definované rádio), ktoré dokáže
prijímať medzi 24 MHz a 1750 MHz. Airspy má šírku pásma 10 MHz.
12-bitový A/D prevodník @ 20 MSPS (80dB SFDR, 64dB SNR, 10.4 ENOB)
Je to zariadenie USB 2.0 napájané zo zbernice USB.
Tento balík obsahuje sadu nástrojov príkazového riadka:
- airspy_cpldjtag: programovanie CLPD
- airspy_info: sondovanie zariadenia a zobrazenie konfigurácie
- airspy_max2837: nástroj na čítanie/zápis registrov čipu
- airspy_rffc5071: nástroj na čítanie/zápis registrov čipu
- airspy_si5351c: nástroj na čítanie/zápis registrov čipu
- airspy_spiflash: čítanie a zápis dát flash zo súboru
- airspy_transfer: prenos a príjem SDR založený na súboroch
- Maintainer
-
- Versions
-
- Popularity
-
- 16 regular users
-
31 recent
-
199 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
airspyhf
|
1.6.8-3
|
HF+VHF software defined radio receiver - user runtime
|
airspyhf:
HF+VHF software defined radio receiver - user runtime
- Description
-
Airspy HF+ is an open source Software Defined Radio that can receive
9 kHZ to 31 MHz and 60 MHz to 260 MHz.
It is a High Speed USB device powered by the USB bus.
This package contains some utility applications.
- airspyhf_gpio
- airspyhf_lib_version
- airspyhf_info: probe device and show configuration
- airspyhf_rx
- airspyhf_calibrate
- Maintainer
-
- Versions
-
- Popularity
-
- 13 regular users
-
21 recent
-
118 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
bladerf
|
0.2019.07-7
|
Nuand bladeRF software-defined radio device (tools)
|
bladerf:
Nuand bladeRF software-defined radio device (tools)
- Description
-
The Nuand bladeRF is an open-source software-defined radio (SDR) system,
comprised of an RF transceiver, a field-programmable gate array (FPGA),
a microcontroller driving a USB 3.0 interface, and a suite of host
libraries and drivers to facilitate interaction with the device.
This package provides command-line tools for controlling the bladeRF.
- Maintainer
-
- Versions
-
- Popularity
-
- 98 regular users
-
94 recent
-
1640 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
cubicsdr
|
0.2.7+dfsg-4
|
Software Defined Radio receiver
|
cubicsdr:
Software Defined Radio receiver
- Description
-
CubicSDR is a cross-platform Software-Defined Radio application which allows
you to navigate the radio spectrum and demodulate any signals you might
discover. It currently includes several common analog demodulation schemes such
as AM and FM and will support digital modes in the future.
CubicSDR uses SoapySDR to access SDR hardware and thereby supports all hardware
for which a SoapySDR module exists.
- Maintainer
-
- Versions
-
- Popularity
-
- 33 regular users
-
20 recent
-
361 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
cutesdr
|
1.20-4
|
simple demodulation and spectrum display program
|
cutesdr:
simple demodulation and spectrum display program
-
-
The CuteSDR application's primary purpose is for spawning custom
applications or for educational use. It is NOT a full featured
program as it is purposely kept simple in order for developers to
more easily spin off their own applications. A further goal was to
use only the stock functionality of Qt ie no libraries or special
drivers. This limits CuteSDR to using only a network connection.
The main gui and framework is written by Moe Wheatly, AE4JY.
CuteSDR itself has only a network interface and will directly support
the RFSPACE NetSDR and SDR-IP radios. The siqs_ftdi and SDRxxServer
applications (packaged separately) provide network interfaces to
RFSPACE USB devices.
- Maintainer
-
- Versions
-
- Tags
-
✏
- uitoolkit
- qt
- Popularity
-
- 12 regular users
-
8 recent
-
183 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
gnss-sdr
|
0.0.10-4
↺
New upstream version
0.0.19.1
available
|
Global navigation satellite systems software defined receiver
|
gnss-sdr:
Global navigation satellite systems software defined receiver
- Description
-
Global Navigation Satellite Systems receiver defined by software.
It performs all the signal processing from raw signal samples up to the
computation of the Position-Velocity-Time solution, including
code and phase observables. It is able to work with raw data files or,
if there is computational power enough, in real time with suitable
radiofrequency front-ends. This software is mainly developed at CTTC
(Centre Tecnologic de Telecomunicacions de Catalunya, https://www.cttc.cat)
with contributions from around the world.
More info at https://gnss-sdr.org
- Reference
-
- Maintainer
-
- Versions
-
- Popularity
-
- 11 regular users
-
8 recent
-
128 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
gnuradio
|
3.7.10.1-2
|
GNU Radio - sada nástrojov softvérového rádia
|
gnuradio:
GNU Radio - sada nástrojov softvérového rádia
-
-
✏
GNU Radio poskytuje bloky na spracovanie signálov na implementáciu
softvérového rádia. Je možné ho používať s ľahko dostupným lacným externým
RF hardvérom na vytváranie softvérových rádií alebo bez hardvéru v
simulačnom prostredí. Široko a používa v zábavných, akademických a
komerčných prostrediach na podporu výskumu bezdrôtovej komunikácie aj v
produkčných rádiových systémoch.
Aplikácie GNU Radio sú napísané najmä v programovacom jazyku Python, zatiaľ
čo samotné spracovanie signálu náročné na výkon je implementované v jazyku
C++ pomocou rozšírení procesora FPU, ak sú k dispozícii. Preto vývojárovi
umožňuje implementovať rádiové systémy s vysokou priepustnosťou v reálnom
čase v jednoducho použiteľnom prostredí s na rýchly vývoj aplikácií.
Hoci nie je primárne nástrojom na simuláciu, GNU Radio podporuje vývoj
algoritmov na spracovanie signálu pomocou vopred zaznamenaných alebo
generovaných dát, vďaka čomu nie je nutné používať skutočný RF hardvér.
Tento balík obsahuje gnuradio-companion, grafický nástroj na vytváranie
grafov toku signálov a generovanie zdrojového kódu toku grafov. Obsahuje
tiež rôzne nástroje a pomocné programy.
- Maintainer
-
- Versions
-
- Tags
-
✏
- role
- dummy
- suite
- gnu
- Popularity
-
- 192 regular users
-
53 recent
-
1254 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
|
▾
|
gqrx-sdr
|
2.17.5-1
|
Software defined radio receiver
|
gqrx-sdr:
Software defined radio receiver
-
-
Gqrx works with hardware supported by gr-osmosdr, including Funcube
Dongle, RTL-SDR, Airspy, HackRF, BladeRF, RFSpace, USRP and SoapySDR.
Gqrx can operate as an AM/FM/SSB receiver with audio output or as an
FFT-only instrument. The built-in Gqrx AFSK1200 decoder can decode
and display AX.25 packets. There are also various hooks for
interacting with external applications using network sockets.
Wideband FM mode has mono, stereo, and RDS (Radio Data System) modes.
Displays FFT plot and spectrum waterfall.
It is powered by GNU Radio and the Qt GUI toolkit.
- Maintainer
-
- Versions
-
- Tags
-
✏
- uitoolkit
- qt
- Popularity
-
- 113 regular users
-
40 recent
-
976 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
gr-hpsdr
|
0.0.0.bb77f3c-2
|
gnuradio interface module for OpenHPSDR protocol 1
|
gr-hpsdr:
gnuradio interface module for OpenHPSDR protocol 1
- Description
-
Hardware supported includes OpenHPSDR Hermes / Metis and Red Pitaya
using the OpenHpsdr protocol.
hermesNB sources decimated downconverted 48K-to-384K receiver complex
stream(s), and sinks one 48k sample rate transmit complex stream.
hermesWB sources raw ADC samples as a vector of floats, with
vlen=16384. Each individual vector contains time contiguous
samples. However there are large time gaps between vectors. This is
how HPSDR produces raw samples, it is due to Ethernet interface rate
limitations between HPSDR and the host computer.
The modules are compatible with version 3.8 of gnuradio and versions of
Hermes firmware 1.8 through at 3.2. (known as OpenHPSDR protocol
1). It is not compatible with the new OpenHPSDR protocol 2.
This package contains the header files and grc block definitions.
- Maintainer
-
- Versions
-
- Popularity
-
- 13 regular users
-
7 recent
-
130 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
gr-limesdr
|
3.0.1-5
|
LimeSDR blocks for GnuRadio
|
gr-limesdr:
LimeSDR blocks for GnuRadio
- Description
-
LimeSDR is a low cost, open source software defined radio (SDR) platform that
can be used to support just about any type of wireless communication standard.
Currently this plugin supports LimeSDR-USB and LimeSDR-Mini boards.
The gr-limesdr blocks for GnuRadio can be used to create flowgraphs that
interface LimeSDR devices through liblimesuite.
This package contains the development files.
- Maintainer
-
- Versions
-
- Popularity
-
- 9 regular users
-
7 recent
-
110 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
gr-osmosdr
|
0.1.4-14
|
Gnuradio blocks from the OsmoSDR project
|
gr-osmosdr:
Gnuradio blocks from the OsmoSDR project
- Description
-
The Osmocom project is a family of projects regarding Open source
mobile communications.
While primarily being developed for the OsmoSDR hardware, this block
as well supports:
- FUNcube Dongle through gr-funcube
- FUNcube Dongle Pro+ through gr-funcube
- RTL2832U based DVB-T dongles through librtlsdr
- RTL-TCP spectrum server (see librtlsdr project)
- gnuradio .cfile input through libgnuradio-blocks
- RFSPACE SDR-IQ, SDR-IP, NetSDR (incl. X2 option)
- Great Scott Gadgets HackRF through libhackrf
- Nuand LLC bladeRF through libbladeRF library
- Ettus USRP Devices through Ettus UHD library
- Fairwaves UmTRX through Fairwaves' fork of UHD
- AIRSPY Receiver
- AIRSPY HF+ Receiver
- SoapySDR support
- Red Pitaya SDR transceiver (http://bazaar.redpitaya.com)
- FreeSRP through libfreesrp
Example applications include osmocom_fft, osmocom_siggen,
and osmocom_spectrum_sense.
By using the OsmoSDR block you can take advantage of a common
software API in your application(s) independent of the underlying
radio hardware. This package provides C++ header files,
documentation, and Python3 wrappers to the library.
- Maintainer
-
- Versions
-
- Tags
-
✏
- devel
- library
- role
- devel-lib
- Popularity
-
- 124 regular users
-
48 recent
-
1035 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
hackrf
|
2022.09.1-3
|
Software defined radio peripheral - utilities
|
hackrf:
Software defined radio peripheral - utilities
- Description
-
HackRF is an open source Software Defined Radio that can receive
and transmit between 30 MHz and 6 GHz. HackRF has a 20 MHz bandwidth.
It is a High Speed USB device powered by the USB bus.
This package contains a set of command line utilities:
- hackrf_clock: HackRF clock configuration utility
- hackrf_cpldjtag: program CLPD
- hackrf_debug: chip register read/write/config tool
- hackrf_info: probe device and show configuration
- hackrf_operacake: control of operacake board via hackrf
- hackrf_spiflash: read and write flash data from file.
- hackrf_sweep: control frequency sweep of hackrf
- hackrf_transfer: file based transmit and receive sdr
- Maintainer
-
- Versions
-
- Popularity
-
- 27 regular users
-
49 recent
-
333 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
inspectrum
|
0.3.1-1
|
tool for visualising captured radio signals
|
inspectrum:
tool for visualising captured radio signals
- Description
-
inspectrum is a tool for analysing captured signals, primarily from
software-defined radio receivers.
inspectrum supports the following file types:
*.sigmf-meta, *.sigmf-data - Signal Metadata Format (SigMF) recordings
*.cf32, *.cfile - Complex 32-bit floating point (GNURadio, osmocom_fft)
*.cf64 - Complex 64-bit floating point samples
*.cs16 - Complex 16-bit signed integer (BladeRF)
*.cs8 - Complex 8-bit signed integer (HackRF)
*.cu8 - Complex 8-bit unsigned integer (RTL-SDR)
*.f32 - Real 32-bit floating point samples
*.f64 - Real 64-bit floating point samples (MATLAB)
*.s16 - Real 16-bit signed integer samples
*.s8 - Real 8-bit signed integer samples
*.u8 - Real 8-bit unsigned integer samples
Features:
- Large (100GB+) file support
- Spectrogram with zoom/pan
- Plots of amplitude, frequency, phase and IQ samples
- Cursors for measuring period, symbol rate and extracting symbols
- Export of selected time period, filtered samples and demodulated data
- Maintainer
-
- Versions
-
- Popularity
-
- 19 regular users
-
9 recent
-
233 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
langford-utils
|
0.0.20130228-6.3
|
Control programs for the Per Vices Noctar IQ demodulator board
|
langford-utils:
Control programs for the Per Vices Noctar IQ demodulator board
- Description
-
These utilities can be used to set up low level functions in the "Noctar"
(formerly "Phi") IQ demodulator board from Per Vices.
If you are unsure whether you need this package, then you don't.
- Maintainer
-
- Versions
-
- Popularity
-
- 4 regular users
-
7 recent
-
82 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
limesuite
|
23.11.0+dfsg-3
|
tools to test, control and update LMS7 transceiver based hardware
|
limesuite:
tools to test, control and update LMS7 transceiver based hardware
-
-
Lime Suite is a collection of software supporting Lime Microsystems LMS7 RF
transceiver based hardware such as the LimeSDR, LMS7002M UNITE board, or the
Novena with LMS7 RF board.
This package contains the command line and GUI tools to control and update the
hardware devices.
- Maintainer
-
- Versions
-
- Popularity
-
- 8 regular users
-
18 recent
-
117 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
miri-sdr
|
0.0.4.59ba37-5
|
Software defined radio support for Mirics hardware (tools)
|
miri-sdr:
Software defined radio support for Mirics hardware (tools)
- Description
-
Software for the Mirics MSi2500 + MSi001 SDR platform
The hardware part of MiriSDR brings information from an antenna connector
to a USB plug.
This package is the software that provides control of the USB hardware
and an API to pass data to software defined radio applications on the host.
This package contains a set of command line utilities:
- Maintainer
-
- Versions
-
- Popularity
-
- 5 regular users
-
15 recent
-
107 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
osmo-sdr
|
0.1.8.effcaa7-1
|
Software defined radio support for OsmoSDR hardware (tools)
|
osmo-sdr:
Software defined radio support for OsmoSDR hardware (tools)
- Description
-
OsmoSDR is a 100% Free Software based small form-factor inexpensive
SDR (Software Defined Radio) project.
The hardware part of OsmoSDR brings information from an antenna connector
to a USB plug.
This package is the software that provides control of the USB hardware
and an API to pass data to software defined radio applications on the host.
This package contains a set of command line utilities:
- Maintainer
-
- Versions
-
- Popularity
-
- 6 regular users
-
19 recent
-
153 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
qthid-fcd-controller
|
4.1-3
|
kontrolér Funcube Dongle
|
qthid-fcd-controller:
kontrolér Funcube Dongle
-
-
✏
Aplikácia ovládača softvérovo definovaného rádia (SDR) kontrolér Funcube
Dongle postavená na knižnici HID API a sade nástrojov grafického
používateľského rozhrania Qt.
Funcube Dongle je malý prijímač softvérovo definovaného rádia pre 64 MHz -
1.7 GHz. Zmestí sa do USB portu počítača a používa USB zvuk na prenos
komplexných dát I/Q do aplikácií SDR. Riadiace API na nastavovanie
frekvencie, zosilnenia, filtrovanie atď. používa štandard USB HID.
Poskytuje plnú podporu Funcube Dongle API:
- zmena frekvencie a korekcia frekvencie
- zmena RF zosilnenia a filtrov
- zmena IF zosilnenia a filtrov
- vylepšenie LNA, bias current atď.
- korekcia I/Q
- ladiace tlačidlá s automatickým opakovaním (vyhľadávanie kliknutím
a podržaním tlačidla).
- krok premenlivej frekvencie
- aktualizácia a overenie firmvéru
- Maintainer
-
- Versions
-
- Popularity
-
- 104 regular users
-
2 recent
-
137 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
quisk
|
4.1.15-1
↺
New upstream version
4.2.39
available
|
Software Defined Radio (SDR)
|
quisk:
Software Defined Radio (SDR)
-
-
This is Quisk, a Software Defined Radio (SDR). You supply an antenna and a
complex (I/Q) mixer to convert the radio spectrum to a low IF. Then send that
IF to your computer using the sound card, Ethernet or USB. The Quisk software
will read the I/Q data, tune it, filter it, demodulate it, and send the audio
to headphones or speakers. Quisk has a microphone input and a key input so it
can operate as a complete transceiver.
Quisk works with this hardware:
- SoftRock connected to the sound card
- Many other SDR's connected to the sound card
- SDR-IQ connected by USB
- Perseus connected by USB
- N2ADR hardware connected by Ethernet and IP
- HiQSDR hardware connected by Ethernet and IP
- The Hermes-Lite project at hermeslite.com
- Quisk can be used as a pan adapter, and can control some radios
Quisk is small and simple, and has been designed so that it is easy to change
Quisk to suit your own hardware. Quisk rhymes with "brisk", and is QSK plus a
few letters to make it easier to pronounce. QSK is a Q signal meaning full
breakin CW operation, and Quisk has been designed for low latency. Quisk
includes an input keying signal that can mute the audio and substitute a
sidetone.
- Maintainer
-
- Versions
-
- Popularity
-
- 17 regular users
-
10 recent
-
162 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
rtl-sdr
|
2.0.2-2
|
softvérom definované rádio pre Realtek RTL2832U - nástroje
|
rtl-sdr:
softvérom definované rádio pre Realtek RTL2832U - nástroje
- Description
-
✏
rtl-sdr je prijímač softvérovo definovaného rádia (SDR) pre isté lacné USB
prijímače DVB-T/DAB(+) založené na čipe Realtek RTL2832U.
Tento balík obsahuje sadu nástrojov príkazového riadka:
- rtl_adsb: jednoduchý dekodér ADS-B pre prijímače RTL2832 založené
na DVB-T
- rtl_eeprom: nástroj na programovanie EEPROM pre prijímače RTL2832
založené na DVB-T
- rtl_fm: úzkopásmový demodulátor FM pre prijímače RTL2832 založené
na DVB-T
- rtl_sdr: záznam I/Q pre prijímače RTL2832 založené na DVB-T
- rtl_tcp: server spektra I/Q pre prijímače RTL2832 založené na DVB-T
- rtl_test: nástroj na tvorbu benchmarkov pre prijímače RTL2832 založené
na DVB-T
- Maintainer
-
- Versions
-
- Popularity
-
- 135 regular users
-
128 recent
-
1378 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware specific package.
- Improve entry
-
|
▾
|
soapyremote-server
|
0.5.2-4
|
Use SoapySDR devices over network (server)
|
soapyremote-server:
Use SoapySDR devices over network (server)
- Description
-
The SoapyRemote project provides a client module and a server that make it
possible on the client side to list and access hardware supported by SoapySDR
modules on the server as if they were local modules.
This package contains the server.
- Maintainer
-
- Versions
-
- Popularity
-
- 94 regular users
-
1 recent
-
98 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
soapysdr-module-airspy
|
0.2.0-3
|
podpora zariadení Airspy pre SoapySDR - predvolená verzia
|
soapysdr-module-airspy:
podpora zariadení Airspy pre SoapySDR - predvolená verzia
- Description
-
✏
Projekt Soapy Airspy poskytuje modul na podporu hardvéru SoapySDR.
Pomocou neho môže akýkoľvek program používajúci SoapySDR ako rozhranie k
hardvéru softvérovo definovaného rádia využívať prijímače Airspy.
Toto je prázdny balík závislostí, ktorý závisí od modulo Airspy pre
predvolenú verziu libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
54 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-audio
|
0.1.1-6
|
Audio device support for SoapySDR (default version)
|
soapysdr-module-audio:
Audio device support for SoapySDR (default version)
- Description
-
The SoapyAudio project provides a SoapySDR module for using Software
Defined Radio devices that are connected through audio interfaces.
It uses hamlib to provide control of tuning and other functions where
available.
This is an empty dependency package that pulls in the audio module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
49 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-bladerf
|
0.4.1-4
|
bladeRF device support for SoapySDR (default version)
|
soapysdr-module-bladerf:
bladeRF device support for SoapySDR (default version)
- Description
-
The Soapy bladeRF project provides a SoapySDR hardware support module.
Using this, any program using SoapySDR to interface to software
defined radio hardware can make use of the nuand bladeRF device to
transmit and receive.
This is an empty dependency package that pulls in the bladeRF module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
48 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-hackrf
|
0.3.3-3
|
HackRF device support for SoapySDR (default version)
|
soapysdr-module-hackrf:
HackRF device support for SoapySDR (default version)
- Description
-
The Soapy HackRF project provides a SoapySDR hardware support module.
Using this, any program using SoapySDR to interface to software
defined radio hardware can make use of the open source HackRF device
to transmit and receive.
This is an empty dependency package that pulls in the HackRF module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
79 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-lms7
|
20.10.0+dfsg-2
|
Lime Microsystems LMS7 device support for SoapySDR (default version)
|
soapysdr-module-lms7:
Lime Microsystems LMS7 device support for SoapySDR (default version)
- Description
-
Lime Suite is a collection of software supporting Lime Microsystems LMS7 RF
transceiver based hardware such as the LimeSDR, LMS7002M UNITE board, or the
Novena with LMS7 RF board.
This is an empty dependency package that pulls in the LMS7 support module for
the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
51 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-mirisdr
|
0.2.5-4
|
Mirics SDR device support for SoapySDR (default version)
|
soapysdr-module-mirisdr:
Mirics SDR device support for SoapySDR (default version)
- Description
-
The SoapyOsmo project provides SoapySDR hardware support modules using
drivers in gr-osmosdr. Using this, any program using SoapySDR to
interface to software defined radio hardware can make use of OsmoSDR,
Mirics SDR, and RFSpace SDR devices.
This is an empty dependency package that pulls in the Mirics SDR module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
49 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-osmosdr
|
0.2.5-8
|
OsmoSDR device support for SoapySDR (default version)
|
soapysdr-module-osmosdr:
OsmoSDR device support for SoapySDR (default version)
- Description
-
The SoapyOsmo project provides SoapySDR hardware support modules using
drivers in gr-osmosdr. Using this, any program using SoapySDR to
interface to software defined radio hardware can make use of OsmoSDR,
Mirics SDR, and RFSpace SDR devices.
This is an empty dependency package that pulls in the OsmoSDR module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
46 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-redpitaya
|
0.1.0-2
|
RedPitaya device support for SoapySDR (default version)
|
soapysdr-module-redpitaya:
RedPitaya device support for SoapySDR (default version)
- Description
-
The Soapy Red Pitaya project provides a SoapySDR hardware support module.
Using this, any program using SoapySDR to interface to software
defined radio hardware can make use of the Red Pitaya HF channels to
transmit and receive.
This is an empty dependency package that pulls in the Red Pitaya module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
38 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-remote
|
0.4.3-1
|
Use SoapySDR devices over network (default client module)
|
soapysdr-module-remote:
Use SoapySDR devices over network (default client module)
- Description
-
The SoapyRemote project provides a client module and a server that make it
possible on the client side to list and access hardware supported by SoapySDR
modules on the server as if they were local modules.
This is an empty dependency package that pulls in the client module for the
default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
45 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-rfspace
|
0.2.5-8
|
RFSpace device support for SoapySDR (default version)
|
soapysdr-module-rfspace:
RFSpace device support for SoapySDR (default version)
- Description
-
The SoapyOsmo project provides SoapySDR hardware support modules using
drivers in gr-osmosdr. Using this, any program using SoapySDR to
interface to software defined radio hardware can make use of OsmoSDR,
Mirics SDR, and RFSpace SDR devices.
This is an empty dependency package that pulls in the RFSpace module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
39 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-rtlsdr
|
0.3.3-1
|
RTL-SDR device support for SoapySDR (default version)
|
soapysdr-module-rtlsdr:
RTL-SDR device support for SoapySDR (default version)
- Description
-
The Soapy RTL-SDR project provides a SoapySDR hardware support module.
Using this, any program using SoapySDR to interface to software
defined radio hardware can make use of low cost DVB-T/DAB+ USB dongles
based on the Realtek RTL2832U chip as receivers.
This is an empty dependency package that pulls in the RTL-SDR module
for the default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
148 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-module-uhd
|
0.4.1-4
|
UHD device support for SoapySDR (default version)
|
soapysdr-module-uhd:
UHD device support for SoapySDR (default version)
- Description
-
Both SoapySDR and the Universal Hardware Driver by Ettus Research projects
provide libraries to access various software defined radio hardware through a
common interface.
This SoapySDR hardware support module makes all UHD devices available to
applications using SoapySDR. An interface in the other direction is available
in the uhd-soapysdr package.
This is an empty dependency package that pulls in the UHD module for the
default version of libsoapysdr.
- Maintainer
-
- Versions
-
- Popularity
-
-
40 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Remark
-
This is a hardware-specific package.
- Improve entry
-
|
▾
|
soapysdr-tools
|
0.5.4-1
|
software defined radio interface library tools
|
soapysdr-tools:
software defined radio interface library tools
- Description
-
SoapySDR is a library providing a common interface to SDR (software
defined radio) hardware. Support for different hardware is added through
external modules.
This package contains the SoapySDRUtil command line utility which can
list available modules and hardware.
- Maintainer
-
- Versions
-
- Popularity
-
- 59 regular users
-
126 recent
-
1026 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
uhd-host
|
3.9.5-2
|
univerzálny hardvérový ovládač pre produkty Ettus Research - hosťovské aplikácie
|
uhd-host:
univerzálny hardvérový ovládač pre produkty Ettus Research - hosťovské aplikácie
- Description
-
✏
Hosťovské nástroje pre univerzálny hardvérový ovládač pre produkty Ettus
Research.
Podporované zariadenia poskytujú hardvér rádioprijímača a vysielača spolu s
digitálnymi rozhraniami na získanie signálu z a do softvérom definovaného
rádia (SDR) bežiaceho na hosťujúcom počítači.
Tento balík obsahuje aplikáciu uhd_find_devices na nájdenie a nastavenie
pripojených periférií, aplikáciu uhd_usrp_probe na zobrazenie informácií o
konfigurácii hardvéru a dokumentáciu vytvorenú pomocou Doxygen.
- Maintainer
-
- Versions
-
- Tags
-
✏
- uitoolkit
- ncurses
- Popularity
-
- 519 regular users
-
20 recent
-
673 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
▾
|
uhd-soapysdr
|
0.4.1-4
|
SoapySDR device support for libuhd
|
uhd-soapysdr:
SoapySDR device support for libuhd
- Description
-
Both SoapySDR and the Universal Hardware Driver by Ettus Research projects
provide libraries to access various software defined radio hardware through a
common interface.
This UHD module makes all SoapySDR devices available to applications using
libuhd. An interface in the other direction is available in the
soapysdr-module-uhd package.
- Maintainer
-
- Versions
-
- Popularity
-
- 3 regular users
-
122 total installations
(of 245926 submissions)
- Debian
-
- Upstream
-
- Improve entry
-
|
|