Debian Multimedia Recording packages

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

Ardour supports pro-audio interfaces through the ALSA project, which provides high quality, well designed device drivers and API's for audio I/O under Linux. Any interface supported by ALSA can be used with Ardour. This includes the all-digital 26 channel RME Hammerfall, the Midiman Delta 1010 and many others.

Ardour has support for 24 bit samples using floating point internally, non-linear editing with unlimited undo, a user-configurable mixer, MTC master/slave capabilities, MIDI hardware control surface compatibility.

It supports MIDI Machine Control, and so can be controlled from any MMC controller and many modern digital mixers.

Ardour contains a powerful multitrack audio editor/arranger that is completely non-destructive and capable of all standard non-linear editing operations (insert, replace, delete, move, trim, select, cut/copy/paste). The editor has unlimited undo/redo capabilities and can save independent "versions" of a track or an entire piece

Ardour's editor supports the community-developed LADSPA plugin standard. Arbitrary chains of plugins can be attached to any portion of a track. Every mixer strip can have any number of inputs and outputs, not just mono, stereo or 5.1. An N-way panner is included, with support for various panning models. Pre- and post-fader sends exist, each with their own gain and pan controls. Every mixer strip acts as its own bus, and thus the bus count in Ardour is unlimited. You can submix any number of strips into another strip.

Ardour's channel capacity is limited only by the number on your audio interface and the ability of your disk subsystem to stream the data back and forth.

JACK (the JACK Audio Connection Kit) is used for all audio I/O, permitting data to be exchanged in perfect samplesync with other applications and/or hardware audio interfaces.

Ardour is sample rate and size neutral - any hardware formats from 8 to 32 bits, and rates from 8kHz to 192kHz. Internal processing in 32/64 bit IEEE floating point format.

Further information can be found at https://ardour.org/.

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

This is a transitional dummy package. It can safely be removed.

audacity는 리눅스/유닉스, MacOS, 윈도용 멀티 트랙 오디오 편집 프로그램입니다. audacity는 디지털 오디오의 쉬운 녹음, 연주, 편집을 위해 디자인됐습니다. audacity에는 디지털 효과, 스펙트럼 분석 도구 같은 특징이 있습니다. 편집이 매우 빠르고 제한 없는 되돌리기와 다시 실행 기능을 제공합니다.

Ogg Vorbis, MP2, MP3, WAV, AIFF, AU 파일 형식을 지원합니다.

Composite is a software application/system for real-time, in-performance sequencing, sampling, and looping. It has a strong emphasis on the needs of live performance improvisation. It is built around the Tritium audio engine, which also includes LV2 plugins.

This package contains the Composite Sampler Plugin (LV2) and the main GUI (composite-gui).

이 툴은 주로 방송용으로 사용되는 오디로 자료의 라우드니스 제어를 도와줍니 다, 하지만 다른 상황에서도 유용하게 사용될 수 있습니다.

ebumeter 및 ebur128은 사용자가 순간 (400ms), 짧은 기간 (3s), 종합 라우드니 스 (시작부터 끝까지)를 측정할 수 있도록 합니다. JACK을 통해 오디오 파일 및 신호에 사용할 수 있습니다.

이 패키지는 두개의 프로그램을 제공합니다.

• ebumeter - jackd를 통해 사용되는 쌍방향 미터
• ebur128 - 사운드 파일을 측정하는 명령행 앱

Advanced GTK+ Sequencer is intended to be used for music composition. It features a piano roll, as well as a synth, matrix editor, drum machine, soundfont2 player, mixer and an output panel. It’s designed to be highly configurable. You may add effects to its effect chain; and add or remove audio channels/pads. You may set up a fully functional network of engines, thus there is a link editor for linking audio lines.

Gtk Wave Cleaner (gwc)는 오디오 파일에서 노이즈 및 클릭을 제거하는 프로그램 입니다. 이 프로그램 오래된 LP 또는 오래된 테이프를 디지탈 형식으로 변환할 때 가장 일반적으로 사용되지만, 잡음 수준이 다소 일정한 모든 사운드 파일에 적용될 수 있습니다.

IanniX is a graphical sequencer for digital arts, inspired by Iannis Xenakis' upic system for graphical scores. IanniX manages events described via graphical elements (like curves) and controls your real-time environment via Open Sound Control (OSC). It can also be fully controlled via OSC (or FUDI, if you prefer).

이 프로그램은 jack을 통해 재생되는 모든 소리를 녹음할 수 있습니다.

jack_capture는 sndfile (wav, aiff, ogg, flac, wavex, au 등)이 지원하는 모든 형식으로 녹음할 수 있습니다.

Jack Audio Mixer는 JACK 오디오 스트리밍을 믹스하기 위한 GTK+ GUI를 제공합니다. 하드웨어 오디오 믹싱 데스크 외관을 유지합니다. 인터페이스 또는 MIDI를 통해 레벨, 밸런스, 뮤트등을 설정할 수 있습니다.

이 패키지는 Python 3용 어플리케이션을 설치합니다.

jmeters는 Jack Audio Connection Kit을 위한 멀티채널 오디오 레벨 미터입니다. meterbridge로 동일한 픽스맵을 사용합니다. meterbridge와의 주요한 차이점은 jmeters는 VU와 PPM 모두에 대해 정확한 탄도값을 가지고 있다는 것 입니다.

A jnoisemeter is a small app designed to measure audio test signals and in particular noise signals.

The simplest use is to measure the S/N ratio of your sound card. If you can calibrate the input levels of your soundcard it can also be used (with some external hardware) to measure noise levels of any type of audio equipment, including preamps and microphones.

Meterbridge는 JACK 오디오 연결 키트에 대한 다양한 미터를 구현합니다. 사용 가능한 타입의 예는 아래와 같습니다:

• PPM Peak Program level Meter
• VU Volume Unit Meter
• DPM Digital Peak Meter
• JF Jellyfish Meter
• SCO Scope

meterec works as a basic multi track tape recorder. The aim of meterec is to minimise the interactions of the users with the computer and allow them to focus on their instrumental performance. For this reason meterec features are minimal. One of the main "limitations" is that meterec can only restart from time 0:00:00.00: if you fail one take, start it over again. Rather than learning how to use a specific software to correct what you lost, meterec forces to learn and master your instrument.

The mjpeg programs are a set of tools that can do recording of videos and playback, simple cut-and-paste editing and the MPEG compression of audio and video under Linux.

The mjpeg programs are a set of tools that can do recording of videos and playback, simple cut-and-paste editing and the MPEG compression of audio and video under Linux.

This package contains the GTK+ frontend.

The MP4v2 library provides an API to create and modify mp4 files as defined by ISO-IEC:14496-1:2001 MPEG-4 Systems. This file format is derived from Apple's QuickTime file format that has been used as a multimedia file format in a variety of platforms and applications. It is a very powerful and extensible format that can accommodate practically any type of media.

MP4v2 was originally bundled with mpeg4ip library, but has been moved into its own maintained library due to a combination of the cessation of support of mpeg4ip and the usefulness of this library on its own.

This package contains the command line frontends.

QJackRcd is a simple stereo recorder for Jack with few features as silence processing for automatic pause, file splitting, background file post-processing. It can be used with QJackCtl.

Features:

• QT simple GUI with disk usage and vumeter.
• Jack support for recording, jack transport support.
• Silence compressing with auto pause and optional file splitting.
• Background WAV post processing for format conversion and signal processing.
• Automatic connection with first launched jack source facility.

This is a MIDI/Audio multi-track sequencer application written in C++.

The Jack Audio Connection Kit (JACK) for audio, and the Advanced Linux Sound Architecture (ALSA) for MIDI, are the main infrastructures to evolve as a fairly-featured Linux Desktop Audio Workstation GUI, especially dedicated to the personal home-studio.

Rotter는 JACK용 방송/오디오 로거 레코딩입니다. 모든 출력을 녹음해야 할 법적 책임이 있는 라디오 방송국에서 사용하도록 만들어졌습니다. Rotter는 지속적으로 실행되며, 매시간마다 새로운 파일을 만듭니다.

Silan is a standalone application to analyze audio files for silence and print ranges of detected signals.

It supports a variety of audio-formats and codecs by making use of libsndfile and ffmpeg/libav for reading audio-data.

Signal threshold and hold-off time can be freely configured. The output can be formatted with samples or seconds as unit or printed as audacity label file.

Timemachine writes the last 10 seconds of audio before the button press and everything from then on up to the next button press into a WAV-file.

The idea is that you doodle away with whatever is kicking around in your studio and when you hear an interesting noise, you press record and capture it, without having to try and recreate it.

It uses the JACK audio connection kit, an API that lets audio applications communicate with each other and share audio data in realtime.

jackd 또는 MTC에서 싱크신호를 수신하는 간단한 비디오 플레이어. 사운드 트랙 생성, 비디오 모니터링 또는 비디오 프레임을 오디오 이벤트와 연관 시키는데 필요한 모든 작업에 어플리케이션을 가지고 있습니다.

예를 들어, (Muse, Rosegarden 또는 Ardour 같은) jack-client가 시간기반 마스 터로 작동하면, xjadeo는 JACK 전송과 동기되는 비디오를 표시할 것 입니다. xjadeo는 대체 동기 신호로 Midi Time clock을 읽을 수 있으며 옵션인 QT-GUI와 함께 제공됩니다.

xjadeo는 기본적으로 오직 검색가능한 미디어만 읽을 수 있습니다. mencoder 또 는 transcode 같은 코드 변환 유틸리티 설치를 강력하게 권장합니다.

온라인 문서: http://xjadeo.sourceforge.net/main.html

This is an easy to use music sequencer with an interface heavily inspired by 90's "tracker" software (most specifically Impulse Tracker).

While contemporary software that uses this approach exists, it usually has a high entry barrier because it maintains compatibility with old formats.

In contrast to this, ZyTrax starts afresh with an user friendly approach (no hex numbers, pure plugin-based architecture, inlined automation envelopes, smart automations, zoomable patterns and a simple pattern/orderlist layout).

These include programs for CD extraction, track conversion from one audio format to another, track renaming and retagging, track identification, CD burning from tracks, and more. Supports internationalized track filenames and metadata using Unicode. Works with high-definition, multi-channel audio as well as CD-quality. Track conversion uses multiple CPUs or CPU cores if available to greatly speed the transcoding process. Track metadata can be retrieved from FreeDB, MusicBrainz or compatible servers.

cdrdao는 CD 내용의 텍스트 설명을 기반으로 오디오 또는 데이타를 disk-at-once (DAO) 모드로 기록합니다.

disk-at-once 모드는 디스크 전체를 기록하는 것 입니다, 예를 들면, 하나 또는 그 이상의 트랙을 리드인하고 단일 스텝으로 리드아웃 합니다. 일반적으로 사용 되는 track-at-once (TAO) 모드는 각 트랩을 독립적으로 기록하며 이는 두개 트 랙 사이에 링크 블록을 필요로합니다. 대부분의 오디오 CD 처럼 여러 트랙의 CD 를 복사하고 싶다면 DAO 모드를 사용하십시요.

cdrdao는 VCD 또는 서브채널 데이타를 갖는 디스크에 일반적으로 사용되는 bin/cue 형식도 처리할 수도 있습니다.

일반 데이타 CD 버닝을 하려고 한다면 이 프로그램 대산 wodim을 사용하십시요.

Deepin-voice-recorder is the default voice recorder for DDE (Deepin Desktop Environment). It has a beautiful and easy-to-use voice recording user interface with simple design. It supports voice recording, record playback, record list management and other functions.

This package is part of DDE (Deepin Desktop Environment).

Ecasound is a software package designed for multitrack audio processing. It can be used for simple tasks like audio playback, recording and format conversions, as well as for multitrack effect processing, mixing, recording and signal recycling.

Ecasound supports a wide range of audio inputs, outputs and effect algorithms. Effects and audio objects can be combined in various ways, and their parameters can be controlled by operator objects like oscillators and MIDI-CCs.

This package provides the ecasound executable.

Nama는 Kai Vehmanen이 개발한 Ecasound 오디오 엔진을 사용하는 멀티트랙 레코 딩, 믹싱, 마스터링용 텍스트 기반 어플리케이션입니다.

tracks, buses, effects, presets, sends, inserts, marks, regions 기능을 포함 합니다. Nama는 JACK 및 ALSA 오디오 프레임워크에서 실행되며, 자동으로 LADSPA 플러그인을 감지하고 Ladish Level 1 세션 처리를 지원합니다.

Nama에 모든 편집은 비파괴 편집입니다. 이펙터는 보통 실시간으로 적용됩니다. 트랙 캐싱 (track freezing) 기능도 지원합니다.

명령 프롬프트는 Nama 명령, Ecasound 대화식 명령, 쉘 명령, 펄 코드를 받아들 여 명령 히스토리 및 자동완성을 제공합니다. 도움말 시스템은 내부 명령 및 LADSPA 이펙트를 다루며 키워드 검색도 포함합니다.

기본적으로 Nama는 터미널 윈도우에서 실행되는 명령 프로세서와 함께 간단한 그 래픽 인터페이스를 출력합니다. -t옵션은 콘솔 유저를 위한 텍스트 인터페이스만 을 제공합니다.

Qjackctl offers a user interface for controlling the JACK sound server daemon. At the same time it figures as a JACK patch bay and monitoring tool.

This is a free, cross platform multitrack audio recording and editing suite, with an innovative and easy to master user interface. It is suited for both the professional and home user, who needs a robust and solid DAW.

The Non DAW Studio is a modular system composed of four main parts consisting of the Non Timeline, the Non Mixer, the Non Sequencer, and the Non Session Manager.

The Non DAW Studio is a complete studio that is fast and light enough to run on low-end hardware.

This is the Non Mixer package.

A simple AC3-compatible audio encoder based on FFmpeg.

jack-oscolloscope is a simple waveform viewer for JACK. The waveform is displayed in realtime, so you can always see the signal the instant it comes through JACK's input port.

Miniaudio (formerly mini_al) is a single file library for audio playback and capture. It's written in C (compilable as C++) and released into the public domain.