Debian Multimedia Recording packages

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

Ardour supports pro-audio interfaces through the ALSA project, which provides high quality, well designed device drivers and API's for audio I/O under Linux. Any interface supported by ALSA can be used with Ardour. This includes the all-digital 26 channel RME Hammerfall, the Midiman Delta 1010 and many others.

Ardour has support for 24 bit samples using floating point internally, non-linear editing with unlimited undo, a user-configurable mixer, MTC master/slave capabilities, MIDI hardware control surface compatibility.

It supports MIDI Machine Control, and so can be controlled from any MMC controller and many modern digital mixers.

Ardour contains a powerful multitrack audio editor/arranger that is completely non-destructive and capable of all standard non-linear editing operations (insert, replace, delete, move, trim, select, cut/copy/paste). The editor has unlimited undo/redo capabilities and can save independent "versions" of a track or an entire piece

Ardour's editor supports the community-developed LADSPA plugin standard. Arbitrary chains of plugins can be attached to any portion of a track. Every mixer strip can have any number of inputs and outputs, not just mono, stereo or 5.1. An N-way panner is included, with support for various panning models. Pre- and post-fader sends exist, each with their own gain and pan controls. Every mixer strip acts as its own bus, and thus the bus count in Ardour is unlimited. You can submix any number of strips into another strip.

Ardour's channel capacity is limited only by the number on your audio interface and the ability of your disk subsystem to stream the data back and forth.

JACK (the JACK Audio Connection Kit) is used for all audio I/O, permitting data to be exchanged in perfect samplesync with other applications and/or hardware audio interfaces.

Ardour is sample rate and size neutral - any hardware formats from 8 to 32 bits, and rates from 8kHz to 192kHz. Internal processing in 32/64 bit IEEE floating point format.

Further information can be found at https://ardour.org/.

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

This is a transitional dummy package. It can safely be removed.

Audacity é um editor de áudio multitrilha para Linux/Unix, MacOS e Windows. Ele foi projetado para gravação, execução e edição fácil de áudio digital. O Audacity apresenta ferramentas de efeitos digitais e para análise de espectro. A edição é muito rápida e oferece desfazer/refazer ilimitado.

Os formatos de arquivos para os quais há suporte incluem Ogg Vorbis, MP2, MP3, WAV, AIFF e AU.

Composite é um programa/sistema para sequenciamento, amostragem ("sampling") e repetição ("looping") em tempo real durante uma performance. Possui uma forte ênfase nas necessidades de improvisação de performances ao vivo. Foi construído ao redor do motor de áudio Tritium, que também inclui extensões LV2.

Este pacote contém a extensão Composite Sampler (LV2) e a interface gráfica (GUI) principal (composite-gui).

Essas ferramentas ajudam a controlar o volume do material de áudio destinado principalmente para transmissões, mas podem ser úteis em outras situações.

ebumeter e ebur128 permitem aos(às) usuários(as) medir sonoridades Momentâneas (400 ms), de Curto prazo (3s) e Integrada (do início ao fim). Podem ser usados ​​em arquivos de áudio e sinais através do JACK.

Este pacote contém dois programas:

• ebumeter - medidor interativo que funciona via jackd
• ebur128 - aplicativo de linha de comando para medir arquivos de som

Advanced GTK+ Sequencer is intended to be used for music composition. It features a piano roll, as well as a synth, matrix editor, drum machine, soundfont2 player, mixer and an output panel. It’s designed to be highly configurable. You may add effects to its effect chain; and add or remove audio channels/pads. You may set up a fully functional network of engines, thus there is a link editor for linking audio lines.

The Gtk Wave Cleaner (gwc) is an application that helps you in getting rid of noise and clicks in audio files. This is most commonly used when translating your old vinyl or old tapes to a digital format, but it can be applied to every soundfile that has a more or less constant noise level.

IanniX is a graphical sequencer for digital arts, inspired by Iannis Xenakis' upic system for graphical scores. IanniX manages events described via graphical elements (like curves) and controls your real-time environment via Open Sound Control (OSC). It can also be fully controlled via OSC (or FUDI, if you prefer).

Com este programa você pode gravar qualquer som reproduzido via jack.

jack_capture permite gravar todos os formatos suportados por sndfile. (wav, aiff, ogg, flac, wavex, au, etc.)

Jack Audio Mixer fornece uma interface gráfica de usuário(a) GTK+ para misturar fluxos de áudio JACK. Tem a aparência de uma mesa de mixagem de áudio de hardware. Pode definir níveis, equilíbrio, mudo, etc., através a interface ou via MIDI.

Este pacote instala o aplicativo para Python 3.

A jmeters is multichannel audio level meter for Jack Audio Connection Kit. It uses the same pixmaps as meterbridge. The main difference to meterbridge is that jmeters has the correct ballistics for both the VU and the PPM.

A jnoisemeter is a small app designed to measure audio test signals and in particular noise signals.

The simplest use is to measure the S/N ratio of your sound card. If you can calibrate the input levels of your soundcard it can also be used (with some external hardware) to measure noise levels of any type of audio equipment, including preamps and microphones.

Meterbridge implements various meters for the JACK Audio Connection Kit. Examples of the available types are:

• PPM Peak Program level Meter
• VU Volume Unit Meter
• DPM Digital Peak Meter
• JF Jellyfish Meter
• SCO Scope

meterec works as a basic multi track tape recorder. The aim of meterec is to minimise the interactions of the users with the computer and allow them to focus on their instrumental performance. For this reason meterec features are minimal. One of the main "limitations" is that meterec can only restart from time 0:00:00.00: if you fail one take, start it over again. Rather than learning how to use a specific software to correct what you lost, meterec forces to learn and master your instrument.

The mjpeg programs are a set of tools that can do recording of videos and playback, simple cut-and-paste editing and the MPEG compression of audio and video under Linux.

The mjpeg programs are a set of tools that can do recording of videos and playback, simple cut-and-paste editing and the MPEG compression of audio and video under Linux.

This package contains the GTK+ frontend.

The MP4v2 library provides an API to create and modify mp4 files as defined by ISO-IEC:14496-1:2001 MPEG-4 Systems. This file format is derived from Apple's QuickTime file format that has been used as a multimedia file format in a variety of platforms and applications. It is a very powerful and extensible format that can accommodate practically any type of media.

MP4v2 was originally bundled with mpeg4ip library, but has been moved into its own maintained library due to a combination of the cessation of support of mpeg4ip and the usefulness of this library on its own.

This package contains the command line frontends.

QJackRcd is a simple stereo recorder for Jack with few features as silence processing for automatic pause, file splitting, background file post-processing. It can be used with QJackCtl.

Features:

• QT simple GUI with disk usage and vumeter.
• Jack support for recording, jack transport support.
• Silence compressing with auto pause and optional file splitting.
• Background WAV post processing for format conversion and signal processing.
• Automatic connection with first launched jack source facility.

This is a MIDI/Audio multi-track sequencer application written in C++.

The Jack Audio Connection Kit (JACK) for audio, and the Advanced Linux Sound Architecture (ALSA) for MIDI, are the main infrastructures to evolve as a fairly-featured Linux Desktop Audio Workstation GUI, especially dedicated to the personal home-studio.

Rotter is a Recording of Transmission / Audio Logger for JACK. It was designed for use by radio stations, who are legally required to keep a recording of all their output. Rotter runs continuously, writing to a new file every hour.

Silan is a standalone application to analyze audio files for silence and print ranges of detected signals.

It supports a variety of audio-formats and codecs by making use of libsndfile and ffmpeg/libav for reading audio-data.

Signal threshold and hold-off time can be freely configured. The output can be formatted with samples or seconds as unit or printed as audacity label file.

Timemachine writes the last 10 seconds of audio before the button press and everything from then on up to the next button press into a WAV-file.

The idea is that you doodle away with whatever is kicking around in your studio and when you hear an interesting noise, you press record and capture it, without having to try and recreate it.

It uses the JACK audio connection kit, an API that lets audio applications communicate with each other and share audio data in realtime.

Reprodutor de vídeo simples que recebe sincronização do jackd ou MTC. Aplica-se na criação de trilha sonora, monitoramento de vídeo ou qualquer tarefa que requeira a associação de quadros de filmes com eventos de áudio.

Por exemplo, quando um cliente-jack (como Muse, Rosegarden ou Ardour) atua como o primário da base de tempo, o xjadeo exibirá o vídeo sincronizado ao transporte JACK. O xjadeo é capaz de ler Midi Time Clock como fonte de sincronização alternativa e vem junto com um QT-GUI opcional.

Por padrão, o xjadeo somente lê mídia que possa ser pesquisada. É altamente recomendado a instalação de um utilitário de transcodificação como o mencoder ou o transcode.

Documentação on-line: http://xjadeo.sourceforge.net/main.html

This is an easy to use music sequencer with an interface heavily inspired by 90's "tracker" software (most specifically Impulse Tracker).

While contemporary software that uses this approach exists, it usually has a high entry barrier because it maintains compatibility with old formats.

In contrast to this, ZyTrax starts afresh with an user friendly approach (no hex numbers, pure plugin-based architecture, inlined automation envelopes, smart automations, zoomable patterns and a simple pattern/orderlist layout).

These include programs for CD extraction, track conversion from one audio format to another, track renaming and retagging, track identification, CD burning from tracks, and more. Supports internationalized track filenames and metadata using Unicode. Works with high-definition, multi-channel audio as well as CD-quality. Track conversion uses multiple CPUs or CPU cores if available to greatly speed the transcoding process. Track metadata can be retrieved from FreeDB, MusicBrainz or compatible servers.

cdrdao grava CD-Rs de áudio ou dados em modo "disk-at-once" (DAO -- todo-o-disco) baseado em uma descrição textual do conteúdo do CD.

Gravar em modo "disk-at-once" grava o disco completo, i.e. começo, uma ou mais trilhas e fim, num único passo. O modo normalmente usado "track-at-once" (TAO) escreve cada trilha de forma independente, o que requer blocos de ligação ("link blocks") entre duas trilhas. Você provavelmente vai querer usar isto se estiver copiando um CD com múltiplas trilhas, como a maioria dos CDs de áudio.

cdrdao também pode manipular o formato bin/cue normalmente usado para VCDs ou discos com dados de subcanal.

Se você quer apenas queimar um CD de dados normal, você provavelmente vai preferir o wodim.

Deepin-voice-recorder is the default voice recorder for DDE (Deepin Desktop Environment). It has a beautiful and easy-to-use voice recording user interface with simple design. It supports voice recording, record playback, record list management and other functions.

This package is part of DDE (Deepin Desktop Environment).

Ecasound is a software package designed for multitrack audio processing. It can be used for simple tasks like audio playback, recording and format conversions, as well as for multitrack effect processing, mixing, recording and signal recycling.

Ecasound supports a wide range of audio inputs, outputs and effect algorithms. Effects and audio objects can be combined in various ways, and their parameters can be controlled by operator objects like oscillators and MIDI-CCs.

This package provides the ecasound executable.

Nama is a text-based application for multitrack recording, mixing and mastering using the Ecasound audio engine developed by Kai Vehmanen.

Features include tracks, buses, effects, presets, sends, inserts, marks and regions. Nama runs under JACK and ALSA audio frameworks, automatically detects LADSPA plugins, and supports Ladish Level 1 session handling.

All editing under Nama is non-destructive. Effects are generally applied in realtime. A track caching (track freezing) function is also available.

The command prompt accepts Nama commands, Ecasound interactive-mode commands, shell commands and perl code, providing command history and autocompletion. The help system covers internal commands and LADSPA effects and includes keyword search.

By default, Nama displays a simple graphic interface while the command processor runs in a terminal window. The -t option provides a text-only interface for console users.

Qjackctl oferece uma interface de usuário para controlar o daemon de servidor de áudio JACK. Ao mesmo tempo, ele se posiciona como uma ferramenta de monitoramento e * JACK patch bay *.

This is a free, cross platform multitrack audio recording and editing suite, with an innovative and easy to master user interface. It is suited for both the professional and home user, who needs a robust and solid DAW.

The Non DAW Studio is a modular system composed of four main parts consisting of the Non Timeline, the Non Mixer, the Non Sequencer, and the Non Session Manager.

The Non DAW Studio is a complete studio that is fast and light enough to run on low-end hardware.

This is the Non Mixer package.

A simple AC3-compatible audio encoder based on FFmpeg.

jack-oscolloscope is a simple waveform viewer for JACK. The waveform is displayed in realtime, so you can always see the signal the instant it comes through JACK's input port.

Miniaudio (formerly mini_al) is a single file library for audio playback and capture. It's written in C (compilable as C++) and released into the public domain.