Debian Multimedia Ambisonics packages

Sine sweep 및 deconvolution을 사용해서 임펄스 응답을 측정. 이 방법에 대한 더 자세한 소개는 아래 URL을 참조하십시오. https://kokkinizita.linuxaudio.org/linuxaudio/downloads/aliki-manual.pdf

Ardour에서 주로 사용되는 앰비소닉 플러그인 세트입니다. 모노 및 스테레오에서 B-format panning, horizontal rotator, square, hexagon, cube로 디코딩합니다.

AmbDec은 최대 36개까지의 스피커를 지원하는 Ambisonics 디코더입니다. 1, 2, 3 차의 수평 및 완전한 3-D 시스템을 위해 사용할 수 있습니다. 디코딩 매트릭스는 전체 사용자 구성이 가능합니다. AmbDec은 대부분의 디코더에는 없는 몇몇 발전 된 기능들이 있습니다:

• 듀얼 주파수 밴드 작동.
• 스피커 거리 보정.
• 근거리장 효과 보정.

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

Ardour supports pro-audio interfaces through the ALSA project, which provides high quality, well designed device drivers and API's for audio I/O under Linux. Any interface supported by ALSA can be used with Ardour. This includes the all-digital 26 channel RME Hammerfall, the Midiman Delta 1010 and many others.

Ardour has support for 24 bit samples using floating point internally, non-linear editing with unlimited undo, a user-configurable mixer, MTC master/slave capabilities, MIDI hardware control surface compatibility.

It supports MIDI Machine Control, and so can be controlled from any MMC controller and many modern digital mixers.

Ardour contains a powerful multitrack audio editor/arranger that is completely non-destructive and capable of all standard non-linear editing operations (insert, replace, delete, move, trim, select, cut/copy/paste). The editor has unlimited undo/redo capabilities and can save independent "versions" of a track or an entire piece

Ardour's editor supports the community-developed LADSPA plugin standard. Arbitrary chains of plugins can be attached to any portion of a track. Every mixer strip can have any number of inputs and outputs, not just mono, stereo or 5.1. An N-way panner is included, with support for various panning models. Pre- and post-fader sends exist, each with their own gain and pan controls. Every mixer strip acts as its own bus, and thus the bus count in Ardour is unlimited. You can submix any number of strips into another strip.

Ardour's channel capacity is limited only by the number on your audio interface and the ability of your disk subsystem to stream the data back and forth.

JACK (the JACK Audio Connection Kit) is used for all audio I/O, permitting data to be exchanged in perfect samplesync with other applications and/or hardware audio interfaces.

Ardour is sample rate and size neutral - any hardware formats from 8 to 32 bits, and rates from 8kHz to 192kHz. Internal processing in 32/64 bit IEEE floating point format.

Further information can be found at https://ardour.org/.

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

This is a transitional dummy package. It can safely be removed.

DRC는 리스닝 룸 보상을 포함하여, HiFI 및 일반적인 오디오 시스템 음향 보상을 위한 보상 필터를 생성하는데 사용되는 프로그램입니다. 프로그램은 단지 FIR 보상 필터를 생성하며, 이로 인해 실시간 또는 오프라인 보상을 제공하는 실 시간 또는 오프라인 컨볼버와 같이 사용할 수 있습니다.

DRC는 진정 정확한 측정도구 이기는 하지만, 컨볼루션 기능을 제공하지 않으며, 오직 몇몇 간단한 기능만을 제공합니다.

The IEM Plug-in Suite is an audio plugin suite created at the Institute of Electronic Music and Acoustics (Graz, Austria). It features Higher-Order Ambisonic plug-ins (up to 7th order), among them a number of state of the art encoders, directional compressors, directivity shapers, delay and reverb effects and analysis tools.

This package provides the plugins as standalone applications.

The IEM Plug-in Suite is an audio plugin suite created at the Institute of Electronic Music and Acoustics (Graz, Austria). It features Higher-Order Ambisonic plug-ins (up to 7th order), among them a number of state of the art encoders, directional compressors, directivity shapers, delay and reverb effects and analysis tools.

This package provides the plugins so they can be used by VST2 hosts.

JACK is a low-latency sound server, allowing multiple applications to connect to one audio device, and to share audio between themselves.

This dummy package depends on the current default JACK implementation.

Japa (JACK and ALSA Perceptual Analyser)는 '지각' 또는 '심리 음향' 오디오 스펙트럼 분석기입니다. 믹싱 또는 마스터링, 주변 소음 평가, 및 (핑크 노이즈 를 사용해서) PA 시스템 이콸라이제이션 과정에서 스펙트럼 모니터링 사용이 가 능합니다.

최대 4개의 오디오 입력이 가능하며 그 중 2개를 그래픽으로 비교할 수 있습니 다. 추가로 핑크 노이즈와 화이트 노이스 생성기는 japa를 실행후 실행됩니다.

Jconvolver is a Convolution Engine for JACK using FFT-based partitioned convolution with multiple partition sizes. It can execute up to a 64 by 64 convolution matrix (i.e. 4096 simultaneous convolutions) as long as your CPU(s) can handle the load.

Package include example files for easy start using jconvolver. These files will be installed in /usr/share/jconvolver/config-files dir. More info in /usr/share/doc/jconvolver/README.CONFIG.

You can also download additional reverb file jconvolver-reverbs.tar.bz2 from http://kokkinizita.linuxaudio.org/linuxaudio/downloads/index.html

libambix is a library of C routines for reading and writing files following the "ambix" (AMBIsonics eXchange) conventions.

Ambisonics is a periphonic (3D) surround sound technique, with a scalable spatial resolution (put simply: "the more audio channels you use, the better"). The ambix convention defines an extensible format for exchanging soundfiles containing Higher Order Ambisonics data.

This package provides the files necessary to compile an application using libambix.

libambix is a library of C routines for reading and writing files following the "ambix" (AMBIsonics eXchange) conventions.

Ambisonics is a periphonic (3D) surround sound technique, with a scalable spatial resolution (put simply: "the more audio channels you use, the better"). The ambix convention defines an extensible format for exchanging soundfiles containing Higher Order Ambisonics data.

This package contains additional commandline utilities to work with ambix-files:

• ambix-info: Print information on ambix files
• ambix-interleave: Merges several audio files into an ambix file
• ambix-deinterleave: Split an ambix file into several mono files
• ambix-jplay: Play back an ambix file via JACK
• ambix-jrecord: Record an ambix file via JACK

libambix is a library of C routines for reading and writing files following the "ambix" (AMBIsonics eXchange) conventions.

Ambisonics is a periphonic (3D) surround sound technique, with a scalable spatial resolution (put simply: "the more audio channels you use, the better"). The ambix convention defines an extensible format for exchanging soundfiles containing Higher Order Ambisonics data.

This package contains a set of Pure Data (Pd) objects to interact with ambix-files:

• [ambix_info]: information about ambix files
• [ambix_read~]: play an ambix file (simple mode)
• [ambix_readX~]: play an ambix file (extended mode)
• [ambix_write~]: record an ambix file

This library contains 3 objects, for calculating Ambisonics encoder matrices, rotation matrices and decoder matrices from 1st to 4th order in 3D, or from 1st to 12th order in 2D.

Qjackctl offers a user interface for controlling the JACK sound server daemon. At the same time it figures as a JACK patch bay and monitoring tool.

The SoundScape Renderer (SSR) is a tool for real-time spatial audio reproduction providing a variety of rendering algorithms, e.g. Wave Field Synthesis, Higher-Order Ambisonics and binaural techniques.

This package contains a version of SSR compiled with graphical interface using Qt.

TetraProc은 사면체 앰비소닉 마이크의 A-형식 신호를 녹음 할 수 있는 B-형식 신호로 변환합니다. 주요기능:

• 클래식 스칼라 매트릭스와 최소 위상 필터를 사용한 A-B변환, 또는
• 측정 및 계산된 임펄스 반응을 사용하는 4x4 콘볼루션 메트릭스 또는 두 조합을 이용한 A-B 변환.
• 개별 마이크 보정 기능.
• 24 dB/oct higpass 필터.
• 계측, 모니터링, 테스트 기능
• 스테레오 모니터링 또는 녹음을 위한 가상 스테레오 마이크.
• 제한 없는 설정 저장.
• 그래픽 사용자 인터페이스를 갖는 Jack 클라이언트.

REV1는 원래 Aeolus용으로 개발된 리버브의 재작업 버젼입니다. 이 이펙트의 특 징은 'plate' 보다는 'hall'에 가깝지만, 다양한 악기 또는 목소리에도 사용할 수 있습니다. 이것은 spatialiser가 아닙니다 - 초기 반사음은 L 및 R 입력에 대 해 다르지만, 실제 방과 일치하지 않습니다. 좌우 소스를 어느 정도 일치시키기 위해 조정되어 왔습니다.

스테레오 모드에서 dry/web 믹스 제어가 제공되며, 따라서 insert 또는 send/return 모드로 사용될 수 있습니다. 모노의 경우 두 채널중 하나만 연결하 십시오.

Ambisonic 모드 (-B 명령행 옵션으로 선택됨)에서는 오직 send/return 모드만 선 택할 수 있습니다.

The Non DAW Studio is a modular system composed of four main parts consisting of the Non Timeline, the Non Mixer, the Non Sequencer, and the Non Session Manager.

The Non DAW Studio is a complete studio that is fast and light enough to run on low-end hardware.

This is the Non Mixer package.

This is a set of cross-platform Ambisonics VST, LV2 plug-ins with variable order for use in Digital Audio Workstations like Ardour or as JACK standalone applications.

The plug-in suite use the ambiX convention (ACN channel order, SN3D normalization, full periphony (3D)). These plug-ins use a recursive implementation of the spherical harmonics, therefore the maximum Ambisonic order is defined at compile time. The practical maximum order is rather defined by the hosts maximum channel count or your CPU power.

This library includes objects to render binaural 2D- and 3D-soundfields (to be played back via headphones) within Pure Data, using the Higher-Order Ambisonics approach.

The Ambisonic Decoder Toolbox is a collection of MATLAB and GNU Octave functions for creating Ambisonic Decoders. Currently, it implements:

• the AllRAD design technique
• the inversion or mode-matching
• truncated mode-matching
• linear combinations of the former two
• constant energy
• Slepian function basis (EPAD)