Debian Multimedia Ambisonics packages

Measure Impulse Responses using a sine sweep and deconvolution. For more complete introduction to this method, see https://kokkinizita.linuxaudio.org/linuxaudio/downloads/aliki-manual.pdf

A set of ambisonics plugins, mainly to be used within Ardour. Mono and stereo to B-format panning, horizontal rotator, square, hexagon and cube decoders.

AmbDec is an Ambisonics decoder for up to 36 speakers. It can be used for both horizontal and full 3-D systems of first, second and third order. The decoding matrices are fully user-configurable. AmbDec has some advanced features not found on most decoders:

• Dual frequency band operation.
• Speaker distance compensation.
• Near-field effect compensation.

All three features can be selectively enabled or disabled in the configuration.

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

Ardour supports pro-audio interfaces through the ALSA project, which provides high quality, well designed device drivers and API's for audio I/O under Linux. Any interface supported by ALSA can be used with Ardour. This includes the all-digital 26 channel RME Hammerfall, the Midiman Delta 1010 and many others.

Ardour has support for 24 bit samples using floating point internally, non-linear editing with unlimited undo, a user-configurable mixer, MTC master/slave capabilities, MIDI hardware control surface compatibility.

It supports MIDI Machine Control, and so can be controlled from any MMC controller and many modern digital mixers.

Ardour contains a powerful multitrack audio editor/arranger that is completely non-destructive and capable of all standard non-linear editing operations (insert, replace, delete, move, trim, select, cut/copy/paste). The editor has unlimited undo/redo capabilities and can save independent "versions" of a track or an entire piece

Ardour's editor supports the community-developed LADSPA plugin standard. Arbitrary chains of plugins can be attached to any portion of a track. Every mixer strip can have any number of inputs and outputs, not just mono, stereo or 5.1. An N-way panner is included, with support for various panning models. Pre- and post-fader sends exist, each with their own gain and pan controls. Every mixer strip acts as its own bus, and thus the bus count in Ardour is unlimited. You can submix any number of strips into another strip.

Ardour's channel capacity is limited only by the number on your audio interface and the ability of your disk subsystem to stream the data back and forth.

JACK (the JACK Audio Connection Kit) is used for all audio I/O, permitting data to be exchanged in perfect samplesync with other applications and/or hardware audio interfaces.

Ardour is sample rate and size neutral - any hardware formats from 8 to 32 bits, and rates from 8kHz to 192kHz. Internal processing in 32/64 bit IEEE floating point format.

Further information can be found at https://ardour.org/.

Ardour is a multichannel hard disk recorder (HDR) and digital audio workstation (DAW). It can be used to control, record, edit and run complex audio setups.

This is a transitional dummy package. It can safely be removed.

DRC — програма для генерації коригувальних фільтрів для акустичної компенсації в HiFi і аудіо-системах в цілому, включаючи компенсацію приміщень. Програма генерує тільки КІХ-фільтри (фільтри зі скінченною імпульсною характеристикою), які можуть бути використані в конвольвері (кореляторі) для забезпечення корекції в реальному часі або на етапі постобробки.

DRC не надає згортку, а лише спрощені, хоча і досить точні, інструменти для вимірювання.

The IEM Plug-in Suite is an audio plugin suite created at the Institute of Electronic Music and Acoustics (Graz, Austria). It features Higher-Order Ambisonic plug-ins (up to 7th order), among them a number of state of the art encoders, directional compressors, directivity shapers, delay and reverb effects and analysis tools.

This package provides the plugins as standalone applications.

The IEM Plug-in Suite is an audio plugin suite created at the Institute of Electronic Music and Acoustics (Graz, Austria). It features Higher-Order Ambisonic plug-ins (up to 7th order), among them a number of state of the art encoders, directional compressors, directivity shapers, delay and reverb effects and analysis tools.

This package provides the plugins so they can be used by VST2 hosts.

Звуковий сервер з низьким рівнем затримки — JACK, дозволяє здійснювати під’єднання кількох застосунків до звукових пристроїв, тим саме, дозволяючи їм колективно використовувати аудіо-підсистему між собою.

Цей фіктивний пакунок залежить від поточної типової реалізації JACK.

Japa, is a 'perceptual' or 'psychoacoustic' audio spectrum analyser. Possible uses include spectrum monitoring while mixing or mastering, evaluation of ambient noise, and (using pink noise) equalisation of PA systems.

It supports up to four audio inputs of which two can graphically be compared. Additionally a pink noise and white noise generator is running after starting japa.

Jconvolver is a Convolution Engine for JACK using FFT-based partitioned convolution with multiple partition sizes. It can execute up to a 64 by 64 convolution matrix (i.e. 4096 simultaneous convolutions) as long as your CPU(s) can handle the load.

Package include example files for easy start using jconvolver. These files will be installed in /usr/share/jconvolver/config-files dir. More info in /usr/share/doc/jconvolver/README.CONFIG.

You can also download additional reverb file jconvolver-reverbs.tar.bz2 from http://kokkinizita.linuxaudio.org/linuxaudio/downloads/index.html

libambix is a library of C routines for reading and writing files following the "ambix" (AMBIsonics eXchange) conventions.

Ambisonics is a periphonic (3D) surround sound technique, with a scalable spatial resolution (put simply: "the more audio channels you use, the better"). The ambix convention defines an extensible format for exchanging soundfiles containing Higher Order Ambisonics data.

This package provides the files necessary to compile an application using libambix.

libambix is a library of C routines for reading and writing files following the "ambix" (AMBIsonics eXchange) conventions.

Ambisonics is a periphonic (3D) surround sound technique, with a scalable spatial resolution (put simply: "the more audio channels you use, the better"). The ambix convention defines an extensible format for exchanging soundfiles containing Higher Order Ambisonics data.

This package contains additional commandline utilities to work with ambix-files:

• ambix-info: Print information on ambix files
• ambix-interleave: Merges several audio files into an ambix file
• ambix-deinterleave: Split an ambix file into several mono files
• ambix-jplay: Play back an ambix file via JACK
• ambix-jrecord: Record an ambix file via JACK

libambix is a library of C routines for reading and writing files following the "ambix" (AMBIsonics eXchange) conventions.

Ambisonics is a periphonic (3D) surround sound technique, with a scalable spatial resolution (put simply: "the more audio channels you use, the better"). The ambix convention defines an extensible format for exchanging soundfiles containing Higher Order Ambisonics data.

This package contains a set of Pure Data (Pd) objects to interact with ambix-files:

• [ambix_info]: information about ambix files
• [ambix_read~]: play an ambix file (simple mode)
• [ambix_readX~]: play an ambix file (extended mode)
• [ambix_write~]: record an ambix file

This library contains 3 objects, for calculating Ambisonics encoder matrices, rotation matrices and decoder matrices from 1st to 4th order in 3D, or from 1st to 12th order in 2D.

Qjackctl надає інтерфейс користувача для керування фоновою службою — звуковим сервером JACK та одночасно має можливості комутації клієнтів сервера й візуалізації його роботи.

The SoundScape Renderer (SSR) is a tool for real-time spatial audio reproduction providing a variety of rendering algorithms, e.g. Wave Field Synthesis, Higher-Order Ambisonics and binaural techniques.

This package contains a version of SSR compiled with graphical interface using Qt.

TetraProc converts the A-format signals from a tetrahedral Ambisonic microphone into B-format signals ready for recording. Main features:

• A-B conversion using a classic scalar matrix and minimum phase filters, or
• A-B conversion using a 4 by 4 convolution matrix using measured or computed impulse responses, or a combination of both.
• Individual microphone calibration facilities.
• 24 dB/oct higpass filters.
• Metering, monitoring and test facilities.
• Virtual stereo mic for stereo monitoring or recording.
• Unlimited number of stored configurations.
• Jack client with graphical user interface.

REV1 is a reworked version of the reverb originally developed for Aeolus. Its character is more 'hall' than 'plate', but it can be used on a wide variety of instruments or voices. It is not a spatialiser - the early reflections are different for the L and R inputs, but do not correspond to any real room. They have been tuned to match left and right sources to some extent.

In Stereo mode a dry/wet mix control is provided, so it can be used either as an insert or in send/return mode. For mono just connect one of the two channels.

In Ambisonic mode (selected by the -B command line option) the only option is the send/return mode.

The Non DAW Studio is a modular system composed of four main parts consisting of the Non Timeline, the Non Mixer, the Non Sequencer, and the Non Session Manager.

The Non DAW Studio is a complete studio that is fast and light enough to run on low-end hardware.

This is the Non Mixer package.

This is a set of cross-platform Ambisonics VST, LV2 plug-ins with variable order for use in Digital Audio Workstations like Ardour or as JACK standalone applications.

The plug-in suite use the ambiX convention (ACN channel order, SN3D normalization, full periphony (3D)). These plug-ins use a recursive implementation of the spherical harmonics, therefore the maximum Ambisonic order is defined at compile time. The practical maximum order is rather defined by the hosts maximum channel count or your CPU power.

This library includes objects to render binaural 2D- and 3D-soundfields (to be played back via headphones) within Pure Data, using the Higher-Order Ambisonics approach.

The Ambisonic Decoder Toolbox is a collection of MATLAB and GNU Octave functions for creating Ambisonic Decoders. Currently, it implements:

• the AllRAD design technique
• the inversion or mode-matching
• truncated mode-matching
• linear combinations of the former two
• constant energy
• Slepian function basis (EPAD)